MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

adding a hunt deck
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=49955		 Page 1 of 1
Author:  dwight37 [ Mon Feb 03, 2014 7:47 pm ]
Post subject:  adding a hunt deck
Ive seen a couple post a while back about adding a hunt deck from what I remembered about yall comments was it was a bad ideal
Has anyone done it and whats the negative about it? ?
Author:  nasty [ Mon Feb 03, 2014 8:09 pm ]
Post subject:  Re: adding a hunt deck
I don't see why it would be a bad deal... As long as it's cut into the hull... Welding it to the hull they may have had some problems
Author:  pokey79 [ Mon Feb 03, 2014 8:12 pm ]
Post subject:  Re: adding a hunt deck
hunt deck yes pods NO
Author:  pokey79 [ Mon Feb 03, 2014 8:14 pm ]
Post subject:  Re: adding a hunt deck
sorry that might look wrong for what u are asking but do not put pods but yes u can add a hunt deck!
Author:  msm8281 [ Mon Feb 03, 2014 8:32 pm ]
Post subject:  Re: adding a hunt deck
Autogateman did it I think.
Author:  autogateman [ Mon Feb 03, 2014 8:40 pm ]
Post subject:  Re: adding a hunt deck
Ive had it done twice, one being the boat I have now. Added on, not cut in. Works beautifully, just make sure a boat builder does it, not just someone who knows how to weld aluminum.
Author:  dwight37 [ Mon Feb 03, 2014 9:04 pm ]
Post subject:  Re: adding a hunt deck
Well im not a boat builder but I did build this boat 2 yrs ago! !
Did you tie yours into the bsck of your old transom on the top and bottom of the new hunt deck?
Author:  jldsc [ Tue Feb 04, 2014 8:44 am ]
Post subject:  Re: adding a hunt deck
I have a thread on this...added one to my boat few months back.ImageUploadedByTapatalk1391524852.909757.jpg
make sure to sure to use plenty bracing, double weld inside and out. I tied in the original runners through to the new transom also....Its alot of mess and checking angles and squareness. It was worth it to me though.


Sent from an Apple Tree..
Author:  dwight37 [ Tue Feb 04, 2014 8:51 am ]
Post subject:  Re: adding a hunt deck
Does it make a difference if you foam fill it or just leave it hollow? ?
Author:  msm8281 [ Tue Feb 04, 2014 8:54 am ]
Post subject:  Re: adding a hunt deck
About 10 lbs
Author:  msm8281 [ Tue Feb 04, 2014 8:55 am ]
Post subject:  Re: adding a hunt deck
Author:  dwight37 [ Tue Feb 04, 2014 9:03 am ]
Post subject:  Re: adding a hunt deck
Thats not the answers I was looking for but they were funny
Also if you add 2ft of huntdeck does that make it difficult to drive or do you buy a longer motor handle
Author:  msm8281 [ Tue Feb 04, 2014 9:52 am ]
Post subject:  Re: adding a hunt deck
What differences do u think it will make if its foam filled?
Author:  dwight37 [ Tue Feb 04, 2014 10:15 am ]
Post subject:  Re: adding a hunt deck
Well I typically cruise around looking for fat chicks ifits foam filled I can haul a couple more of them back home
Author:  Bigbuckfever [ Tue Feb 04, 2014 10:20 am ]
Post subject:  Re: adding a hunt deck
Foam doesnt help with bouyancy........
Author:  jldsc [ Tue Feb 04, 2014 10:44 am ]
Post subject:  Re: adding a hunt deck
Foam only comes to play when you try and do it backwards and put the water inside out instead of on the outside where it belongs....2' of huntdeck will increase buoyancy by quite a bit...mine is 16" and gave more maneuverability inside the boat without the tiller hangin way inside the boat


Sent from an Apple Tree..
Author:  dwight37 [ Tue Feb 04, 2014 10:48 am ]
Post subject:  Re: adding a hunt deck
16" gotcha!!
Any reason why you didnt taper the sides in jldsc?
Author:  eljefe [ Tue Feb 04, 2014 11:01 am ]
Post subject:  Re: adding a hunt deck
if you taper the bottom back of huntdeck and dont get the angle just right, it will cause the back end to suck down.... If i were to build another boat, it would be square at the transom....the angle does not help all that much in reverse except maybe with a prodrive since it is lifting the boat in reverse instead of pulling the boat down and the same in forward........
Author:  dwight37 [ Tue Feb 04, 2014 11:36 am ]
Post subject:  Re: adding a hunt deck
Right now im having trouble getting 3 guys 200,200,260lbs with all the hunting crap up on step it will do about 23 with this load
And add 1 more guy and it wont get up
Will the huntdeck help or hurt if I add it? ?
Currently its a 1648 w 35gtr stock
Oh empty boat with just me 200lbs it gps31
Author:  eljefe [ Tue Feb 04, 2014 11:39 am ]
Post subject:  Re: adding a hunt deck
mod the motor....... you will see better results...adding length will help the boat run "flatter" but it sounds like you need more rpms.......get a cam and then maybe exhaust and heads.....
Author:  jldsc [ Tue Feb 04, 2014 11:42 am ]
Post subject:  Re: adding a hunt deck
I just kept all the lines the same as the existing sides n bottom with a straight edge....just like it would have been on the boat originally.


Sent from an Apple Tree..
Author:  Mngtail [ Sun Feb 09, 2014 8:18 pm ]
Post subject:  Re: adding a hunt deck
I was thinking about getting a hunt deck cut out of my 1754 gator tail just wondering if somebody had the dimensions of a factory gator tail hunt deck thanks
Author:  kirk [ Thu Apr 17, 2014 11:37 pm ]
Post subject:  Re: adding a hunt deck
I have a 17x46 alweld, it squats very low with a 40outboard, I'm close to sealing a deal on a pd, but scared it will be somewhat sketchy as far as that much weight.. I wouldn't mind adding a huntdeck if I knew someone who could do it right, any help here?
Author:  MNGunner [ Fri Apr 18, 2014 6:52 am ]
Post subject:  Re: adding a hunt deck
Author:  pintail_89 [ Fri Apr 18, 2014 6:58 am ]
Post subject:  Re: adding a hunt deck
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/