Tell them boys to put my boat down and start welding up the rest of my boats!
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Prodigy 17 and 1848 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=50576 |
Page 1 of 1 |
| Author: | careybrowning [ Wed Feb 19, 2014 1:38 pm ] |
| Post subject: | Prodigy 17 and 1848 |
Chad just finished up a few of his first 48" wide hulls. This was a 1748 and an 1848. Both had 18" sides but can be had with up to 24" sides. One was a Vbow and the other flat. Check out the pick of them moving the boats...by hand. Pretty impressive for a one piece .125 5086 hull decked out. I don't think he has weighed one yet, but I'm amazed at how light they are considering they are built like tanks. |
|
| Author: | careybrowning [ Wed Feb 19, 2014 1:47 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
dayum double posting..... Can a fella get a little help deleting this one? My bad. |
|
| Author: | fowllife08 [ Wed Feb 19, 2014 1:58 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Very nice! |
|
| Author: | BoatDR [ Wed Feb 19, 2014 2:04 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Tell them boys to put my boat down and start welding up the rest of my boats!
|
|
| Author: | Ducaholic [ Wed Feb 19, 2014 2:10 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Damn they look good! |
|
| Author: | Ducaholic [ Wed Feb 19, 2014 2:17 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | cr244 [ Wed Feb 19, 2014 2:23 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
what is the inside floor width if it had a full foor with no gutters? the boats look awesome by the way |
|
| Author: | schmitt [ Wed Feb 19, 2014 2:49 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Looks like the guy in tha camo is going to blow his nuts!  Dont think I like the gunnel caps going over the huntdeck. |
|
| Author: | Howdy [ Wed Feb 19, 2014 4:35 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Nice looking boats |
|
| Author: | Smoke [ Wed Feb 19, 2014 5:12 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | ajverret [ Wed Feb 19, 2014 6:23 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
ImageUploadedByTapatalk1392855764.305972.jpg Just sent this sketch to chad to get some feedback |
|
| Author: | bckiller [ Wed Feb 19, 2014 6:27 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Bad ass boats. He's just abt to start on my 2nd one. |
|
| Author: | ajverret [ Wed Feb 19, 2014 6:29 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
I've been to gator tail and gatortrax I'm just trying to find that perfect boat for fishing and hunting |
|
| Author: | Russ [ Wed Feb 19, 2014 6:57 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
The first pic, and the first one they're picking up (same boat), is mine. Going to wind up with a 27hp on it for now (already have the motor, will upgrade eventually). I've been patiently waiting, because i can't make the trip out there until sometime late March or April. That boat is gonna be mad at me when I finally make it out there.  Im excited, for sure |
|
| Author: | dfou [ Wed Feb 19, 2014 6:59 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | North LA Hunter [ Wed Feb 19, 2014 7:00 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | 270Handiman [ Wed Feb 19, 2014 7:15 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | Russ [ Wed Feb 19, 2014 7:27 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | renovator [ Wed Feb 19, 2014 7:33 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Those guys must be strong being the tub weights 220 +/- |
|
| Author: | Prodigy [ Fri Feb 21, 2014 11:07 am ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Russ..........sold ur boat today..... woops!! |
|
| Author: | NORTHFLORIDAFOWLER [ Fri Feb 21, 2014 5:11 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
| Author: | FRANKtheTAU [ Fri Feb 21, 2014 5:40 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Awesome looking boats! And IMO you can't beat that Bottomland camo in the flooded timber that I hunt! |
|
| Author: | DmaxHunter [ Fri Feb 21, 2014 5:57 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Mine is pretty easy to push, still trying to get the hang of this gg, man this is some slick shit. But makes for easy pushing Sent from my shitty cell |
|
| Author: | Russ [ Fri Feb 21, 2014 9:28 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
Damn, Chad. You killin me.....Ya'll, Chad sucks ballz....  Seriously, I told him to sell it if he had someone that really wanted it, since I can't get out there to pick it up yet. He's building another for me, just with a bit later completion date, and he still got this one sold to someone in a bit more of a hurry than me. Chad, did you at least etch the model name under or behind something like I asked? The little easter egg? I'll send you an email with updated build info, so you can get me back in line, and Josh said he was making a decision by first of the week, so I or he will let you know on that one (and will get you the deposit if he decides to pull the trigger). Thanks for chat earlier, I'll take your word for it on the changes. |
|
| Author: | Prodigy [ Fri Feb 21, 2014 9:59 pm ] |
| Post subject: | Re: Prodigy 17 and 1848 |
no worries bro.......... tks again and ill get to Toledo as soon as we can for a weekend. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|