MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

18X54 Dual Rig
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=50663		 Page 1 of 1
Author:  The Hairy Coot [ Fri Feb 21, 2014 11:53 am ]
Post subject:  18X54 Dual Rig
Anyone hear ever run a dual engine rig on an 18x54?
Author:  quackconsumer [ Fri Feb 21, 2014 12:10 pm ]
Post subject:  Re: 18X54 Dual Rig
Does trolling motor count?
Author:  brycecheramie [ Fri Feb 21, 2014 12:57 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  Gameover [ Fri Feb 21, 2014 1:12 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  lastchance [ Fri Feb 21, 2014 1:31 pm ]
Post subject:  Re: 18X54 Dual Rig
If I remember correctly Brinkleydog ran one...
Author:  lastchance [ Fri Feb 21, 2014 1:33 pm ]
Post subject:  Re: 18X54 Dual Rig
Nevermind it was a 20x54....

viewtopic.php?t=10153
Author:  diddyduck [ Fri Feb 21, 2014 1:44 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  brycecheramie [ Fri Feb 21, 2014 2:06 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  eljefe [ Fri Feb 21, 2014 7:11 pm ]
Post subject:  Re: 18X54 Dual Rig
Wider is better... If motors are too close to sides you will get dirty water....

Sent from my SCH-I545 using Tapatalk
Author:  The Hairy Coot [ Fri Feb 21, 2014 7:33 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  msm8281 [ Fri Feb 21, 2014 9:02 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  nasty [ Fri Feb 21, 2014 9:14 pm ]
Post subject:  Re: 18X54 Dual Rig
They'll rob water from each other... Won't run very well.
Author:  Woodiebuster [ Fri Feb 21, 2014 9:15 pm ]
Post subject:  Re: 18X54 Dual Rig
I think uncle J's dual rig was a 19x54

It sank.
Author:  msm8281 [ Fri Feb 21, 2014 9:16 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  WhoDat88 [ Fri Feb 21, 2014 10:01 pm ]
Post subject:  Re: 18X54 Dual Rig
One motor would push that boat good. Might want to go bigger.
Author:  rob_E [ Fri Feb 21, 2014 10:24 pm ]
Post subject:  Re: 18X54 Dual Rig
I have an 18x54 and my stage 1 motor is plenty I run 32-33 light and 26-28 loaded
Author:  BradS [ Fri Feb 21, 2014 10:33 pm ]
Post subject:  Re: 18X54 Dual Rig
PD does pretty good on a 54... GT has to have a 60 from what I understand
Author:  WhoDat88 [ Fri Feb 21, 2014 10:34 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  eljefe [ Sat Feb 22, 2014 9:50 am ]
Post subject:  Re: 18X54 Dual Rig
Dirty water meaning turbulent water from the corners....

Sent from my SCH-I545 using Tapatalk
Author:  eljefe [ Sat Feb 22, 2014 9:52 am ]
Post subject:  Re: 18X54 Dual Rig
Is there a way to do them counter rotation?

Sent from my SCH-I545 using Tapatalk
Author:  calphil [ Sat Feb 22, 2014 10:52 am ]
Post subject:  Re: 18X54 Dual Rig
^^^ that would be the ticket for duals
Author:  The Hairy Coot [ Sat Feb 22, 2014 5:49 pm ]
Post subject:  Re: 18X54 Dual Rig
Author:  Woodiebuster [ Sat Feb 22, 2014 9:09 pm ]
Post subject:  Re: 18X54 Dual Rig
That wouldn't do it, the drive shaft would have to spin the other direction. Like through a gear box or something.

With outboards one motor would be in forward and the other in reverse same gear reduction with counter rotation props.
Cant really do that with any of the MM's available..... cept maybe a sport v-h motor seein as they have outboard L/U's...... :shock:
Author:  cr244 [ Sun Feb 23, 2014 8:03 am ]
Post subject:  Re: 18X54 Dual Rig
Author:  nasty [ Wed Mar 05, 2014 8:38 am ]
Post subject:  Re: 18X54 Dual Rig
Author:  Woodiebuster [ Wed Mar 05, 2014 11:06 am ]
Post subject:  Re: 18X54 Dual Rig
A gtr has a bigger gear reduction in reverse, so that wouldn't work
Author:  Will [ Wed Mar 05, 2014 11:35 am ]
Post subject:  Re: 18X54 Dual Rig
Have the flywheel broached, change the timing, custom cam, some head work a little starter modification and run the left motor backwards...
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/