smart man!!! You don't want to use any primer for the bottom! The GG sticks better than etching primer. Once you get the SF off wipe it good with acetone and you're ready to go.
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Best Self Etching Primer? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=53135 |
Page 1 of 1 |
| Author: | Duckaholic-Anonymous [ Sun May 11, 2014 1:46 pm ] |
| Post subject: | Best Self Etching Primer? |
I'm doing some touch up work and don't really care for the rattle can paint. Anyone have good success with a certain brand? Sent from my iPhone using Tapatalk |
|
| Author: | Randy S [ Sun May 11, 2014 3:17 pm ] |
| Post subject: | Re: Best Self Etching Primer? |
It's been a while, so there may be something better, but I've used PPG DPX171 and it worked fine. There were some limitations on what you could direct topcoat it with, so you'll want to check the datasheet. I know you want to stay away from the rattle cans, but I've used SEM self-etching in the can it worked well. |
|
| Author: | North LA Hunter [ Sun May 11, 2014 3:50 pm ] |
| Post subject: | Re: Best Self Etching Primer? |
For touch up I would get the Johnson/Evinrude zinc chromate primer in a spray can. Sent from my beeper |
|
| Author: | Duckaholic-Anonymous [ Sun May 11, 2014 4:03 pm ] |
| Post subject: | Re: Best Self Etching Primer? |
I say touch up lightly, it's touch up on the inside and I'm debating priming the bottom of the boat once I remove some old flexsteel. What do the boat manufacturers use? Sent from my iPhone using Tapatalk |
|
| Author: | Frog [ Sun May 11, 2014 6:32 pm ] |
| Post subject: | Re: Best Self Etching Primer? |
What are you putting on the bottom once you get the steel flex off? |
|
| Author: | Duckaholic-Anonymous [ Sun May 11, 2014 6:45 pm ] |
| Post subject: | Re: Best Self Etching Primer? |
More steelflex....jk gator glide Sent from my iPhone using Tapatalk |
|
| Author: | Frog [ Sun May 11, 2014 6:57 pm ] |
| Post subject: | Re: Best Self Etching Primer? |
| smart man!!! You don't want to use any primer for the bottom! The GG sticks better than etching primer. Once you get the SF off wipe it good with acetone and you're ready to go.
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|