MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

new GTR 35
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=53181		 Page 1 of 2
Author:  debo [ Mon May 12, 2014 7:18 pm ]
Post subject:  new GTR 35
Went pick up my new gtr today will be running on a 18/50 should run it this week sometimes will post up in boat review speeds and how the new lower and 3 blade run
Author:  fowllife08 [ Mon May 12, 2014 7:26 pm ]
Post subject:  Re: new GTR 35
Damn. You got the new lu, and the new handle. Let us know!
Author:  debo [ Mon May 12, 2014 7:40 pm ]
Post subject:  Re: new GTR 35
can't wait to see how much vibration it takes out with the 3 blade and new handle, just heard the tiller torque is worst with the 3 blade but from what GT says the new lower will eliminate the tiller torque we shall see i guess
Author:  calphil [ Mon May 12, 2014 8:20 pm ]
Post subject:  Re: new GTR 35
Let's see the new handle
Author:  debo [ Mon May 12, 2014 8:30 pm ]
Post subject:  Re: new GTR 35
ill post some pics up close of the handle tom.
Author:  DmaxHunter [ Tue May 13, 2014 7:39 am ]
Post subject:  Re: new GTR 35
Some close ups of motor and handle please,

My S5
Author:  baron von [ Tue May 13, 2014 7:43 am ]
Post subject:  Re: new GTR 35
is that the 2015 GTR?

Looks awesome - I cannot wait for mine to get here :)

BTW - great looking rig man!
Author:  BoatDR [ Tue May 13, 2014 7:48 am ]
Post subject:  Re: new GTR 35
I didnt think that Redbird was still making boats. Or is that an old boat with a fresh paint job?

Either way, that's a nice rig.
Author:  debo [ Tue May 13, 2014 11:44 am ]
Post subject:  Re: new GTR 35
New boat he still makes a few a year, he builds a good solid boat his welding skills are excellent thats the main reason i went with him
Author:  debo [ Tue May 13, 2014 12:42 pm ]
Post subject:  Re: new GTR 35
new tiller handle pic
Author:  DmaxHunter [ Tue May 13, 2014 12:52 pm ]
Post subject:  Re: new GTR 35
I like it better, than the old style

My S5
Author:  BoatDR [ Tue May 13, 2014 12:52 pm ]
Post subject:  Re: new GTR 35
Author:  Pete14 [ Tue May 13, 2014 1:49 pm ]
Post subject:  Re: new GTR 35
I noticed you have a shim for the transom height. What did you use and what was your original transom height?
Author:  pearl river outlaw [ Tue May 13, 2014 1:52 pm ]
Post subject:  Re: new GTR 35
I like that almost makes me want to sell mine......
Author:  debo [ Tue May 13, 2014 2:06 pm ]
Post subject:  Re: new GTR 35
Transom height was 19.5 brought it up to 20.5 used 1 x 2 aluminum rectangle tubing
Author:  Pete14 [ Tue May 13, 2014 2:21 pm ]
Post subject:  Re: new GTR 35
Author:  TPerkins [ Tue May 13, 2014 3:08 pm ]
Post subject:  Re: new GTR 35
thats sharp lookin'
Author:  debo [ Tue May 13, 2014 4:09 pm ]
Post subject:  Re: new GTR 35
Didn't run it before I put the shim, belt housing was like an inch below the bottom of the boat so I put them shim. transom angle
Is at 22 degrees
Author:  Pete14 [ Tue May 13, 2014 4:20 pm ]
Post subject:  Re: new GTR 35
Author:  Pete14 [ Tue May 13, 2014 6:03 pm ]
Post subject:  Re: new GTR 35
What is the width of the gtr frame where it mounts to the transom...
Author:  willett [ Tue May 13, 2014 7:22 pm ]
Post subject:  Re: new GTR 35
I Saw you there and was wondering who's boat. Good looking rig!

I was picking up a couple motors



Author:  willett [ Tue May 13, 2014 7:25 pm ]
Post subject:  Re: new GTR 35
Author:  debo [ Tue May 13, 2014 7:25 pm ]
Post subject:  Re: new GTR 35
I seen you there they mounted my motor after the finished loading you up, pete14 I'll get you a measurement in the morning
Author:  Pete14 [ Tue May 13, 2014 7:32 pm ]
Post subject:  Re: new GTR 35
Author:  willett [ Tue May 13, 2014 7:35 pm ]
Post subject:  Re: new GTR 35
Older models were like
8-3/16 and it makes a difference because the thru transom bolts don't line up and I forgot about it until I put my other Tiller motor back on little boat and dammit the holes are off lol
Author:  Pete14 [ Tue May 13, 2014 7:44 pm ]
Post subject:  Re: new GTR 35
I should have my new one here this week with the new lower and handle. Just getting the shims set up for when I'm ready to mount it.
Author:  Fooshman [ Wed May 14, 2014 4:53 am ]
Post subject:  Re: new GTR 35
All all the motors like that now?
Author:  debo [ Wed May 14, 2014 6:44 am ]
Post subject:  Re: new GTR 35
Author:  willett [ Wed May 14, 2014 9:09 am ]
Post subject:  Re: new GTR 35
Yea I had 4 Tillers and One Console motor and only the console motor had the new LU all others were older style LU and handle
Author:  TPerkins [ Wed May 14, 2014 4:31 pm ]
Post subject:  Re: new GTR 35
...
Author:  Stihl Duck [ Wed May 14, 2014 5:30 pm ]
Post subject:  Re: new GTR 35
Looks gd, waiting patiently on mine....
Author:  Kaboom [ Wed May 14, 2014 6:03 pm ]
Post subject:  Re: new GTR 35
Im waiting impatiently on mind. Lol


Sent from my iPhone using Tapatalk
Author:  lunacris [ Wed May 14, 2014 6:25 pm ]
Post subject:  Re: new GTR 35
does the handle stay upright by itself. in the pic it looks like there is a string holding it up
Author:  JLACOUR [ Wed May 14, 2014 7:28 pm ]
Post subject:  new GTR 35
Author:  North LA Hunter [ Wed May 14, 2014 7:29 pm ]
Post subject:  Re: new GTR 35
Author:  JLACOUR [ Wed May 14, 2014 7:32 pm ]
Post subject:  new GTR 35
Author:  dogndux [ Wed May 14, 2014 7:36 pm ]
Post subject:  Re: new GTR 35
I'm a rookie to GT motors ....... What is different about the new handle, other than the grip? Thanks.....


Sent from my iPad using Tapatalk
Author:  JLACOUR [ Wed May 14, 2014 7:37 pm ]
Post subject:  Re: new GTR 35
Author:  JLACOUR [ Wed May 14, 2014 7:38 pm ]
Post subject:  Re: new GTR 35
Revolutionary!!
Author:  JLACOUR [ Wed May 14, 2014 7:38 pm ]
Post subject:  Re: new GTR 35
Same technology my 2004 model prodrive had, by the way!! :lol:
Page 1 of 2 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/