MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/
Trim Relays????? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=57245	Page 1 of 1

---

Author:	pearl river outlaw [ Thu Oct 09, 2014 12:50 pm ]
Post subject:	Trim Relays?????
Can you get the dam things from Autozone or parts house.One of mine has gone out.....

---

Author:	baron von [ Thu Oct 09, 2014 12:52 pm ]
Post subject:	Re: Trim Relays?????
does it have any printing on the relay? should be able to match up 12v relay pretty easy? http://www.amazon.com/Parts-Express-Wat ... =12v+relay

---

Author:	pearl river outlaw [ Thu Oct 09, 2014 12:57 pm ]
Post subject:	Re: Trim Relays?????
Thats it!!!

---

Author:	baron von [ Thu Oct 09, 2014 1:49 pm ]
Post subject:	Re: Trim Relays?????
That’s it as in: 1. That’s the part I need 2. That’s it I have had it with you fuckers! 3. That’s it I moving to Mud Motor elitist shat 4. That’s it I buying a Prodrive

---

Author:	NORTHFLORIDAFOWLER [ Thu Oct 09, 2014 2:00 pm ]
Post subject:	Re: Trim Relays?????

---

Author:	pearl river outlaw [ Thu Oct 09, 2014 2:06 pm ]
Post subject:	Re: Trim Relays?????
#1 Brother thanks! I'm going to run by Autozone and see if they got such though.....

---

Author:	cb5331 [ Fri Oct 10, 2014 11:32 am ]
Post subject:	Re: Trim Relays?????
The standard ones you see at the auto parts store, specifically the ones you can grab off the rack are probably only 20a relays. Most of the relays on trim systems are at least 50a and should probably be rated for more.

---

Author:	baron von [ Fri Oct 10, 2014 11:44 am ]
Post subject:	Re: Trim Relays?????
MOST relays have the data and amp ranges printed right on them - and then if it's 2, 4 or 5 terminal

---

Author:	pearl river outlaw [ Mon Oct 13, 2014 7:09 am ]
Post subject:	Re: Trim Relays?????
If anyones needs one go to parts house they $17......

---

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/