| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| New Rig just in time for second split https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=58552 |
Page 1 of 1 |
| Author: | WingCutter [ Tue Dec 09, 2014 4:10 pm ] |
| Post subject: | New Rig just in time for second split |
I just finished my new rig. I did some things a lil different than I have seen on here. Any ideas or input from yall would be great. Please go easy on me as this is my first MM rig. Also this thing won't turn for shit. Any ideas or better yet pics of what I could do that won't take away from performance but help with the pushing in a turn would be great. Stats- 1856 custom flat bottom New GTR 3 blade with stage one from GT Light bar and cubes in front with reverse cubes in back Red LED interior lights under catwalk Collapsible grab bar Custom switch panel with 12v outlet Full floor with custom gutter system HydroTurff throughout 5" catwalks Shark eye lights Hunt deck Gator Glide with Gator Base Modular system in rear for seats or removable fishing deck 12 gallon fuel tank with Two 31 class DH batts in front 2 bank on board Batt charger She is heavy guessing around 1000-1100+ LBS With 3 people (800lbs of meat all big guys) I got 26mph By myself I got 28 mph in about 2.5'-3.5' of water |
|
| Author: | WingCutter [ Tue Dec 09, 2014 4:11 pm ] |
| Post subject: | Re: New Rig just in time for second split |
a few more |
|
| Author: | WingCutter [ Tue Dec 09, 2014 4:12 pm ] |
| Post subject: | Re: New Rig just in time for second split |
the grab bar |
|
| Author: | 270Handiman [ Tue Dec 09, 2014 4:20 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Stage 1.....you did heads, cam, and exhaust? Loaded speeds are decent. I've got a round chine so I don't have the turning problem, but apparently you just "have to learn to drive it." Nice rig! |
|
| Author: | baron von [ Tue Dec 09, 2014 4:26 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Sweet - I like your forward candle power (lights)! |
|
| Author: | WingCutter [ Tue Dec 09, 2014 4:31 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Thanks guys! I was in deeper water by myself. The boat is heavy but should get to 30 when everything is right. |
|
| Author: | WingCutter [ Tue Dec 09, 2014 5:01 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Yes just heads, cam, and exhaust. |
|
| Author: | HOTSAUCE170 [ Tue Dec 09, 2014 8:00 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Who built that boat? Sent from denda this |
|
| Author: | North LA Hunter [ Tue Dec 09, 2014 8:10 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Best way to turn with a square chine is let off the throttle. She will turn on a dime then. Good looking boat! Congrats on the build! Sent from my beeper |
|
| Author: | B Alsabrook [ Tue Dec 09, 2014 8:17 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Nice! |
|
| Author: | WingCutter [ Tue Dec 09, 2014 8:23 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Nasty started the build. He did the main part of it and then me and the guys at work finish it out. Thanks guys for the kind words. She was labor of love. I say "she" cause it's only a she that I could have such a love hate thing with. |
|
| Author: | HOTSAUCE170 [ Tue Dec 09, 2014 8:29 pm ] |
| Post subject: | Re: New Rig just in time for second split |
It's an awesome boat man Sent from denda this |
|
| Author: | fowllife08 [ Tue Dec 09, 2014 8:50 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Man mike sure did a good job on that boat! Good speeds also! |
|
| Author: | Bamaboy2223 [ Tue Dec 09, 2014 8:52 pm ] |
| Post subject: | Re: New Rig just in time for second split |
What type of exhaust is that? |
|
| Author: | fowllife08 [ Tue Dec 09, 2014 8:54 pm ] |
| Post subject: | Re: New Rig just in time for second split |
| Author: | 270Handiman [ Tue Dec 09, 2014 9:07 pm ] |
| Post subject: | Re: New Rig just in time for second split |
| Author: | WingCutter [ Tue Dec 09, 2014 9:10 pm ] |
| Post subject: | Re: New Rig just in time for second split |
| Author: | Frog [ Wed Dec 10, 2014 5:51 am ] |
| Post subject: | Re: New Rig just in time for second split |
Real nice man, congrats |
|
| Author: | stu [ Wed Dec 10, 2014 5:57 am ] |
| Post subject: | Re: New Rig just in time for second split |
Congrats, very we'll thought out rig. Sent from my iPad using Tapatalk HD |
|
| Author: | JoeCutOff [ Mon Dec 22, 2014 12:35 pm ] |
| Post subject: | Re: New Rig just in time for second split |
nice rig. enjoy it! |
|
| Author: | deadbird8 [ Sun Dec 28, 2014 8:17 am ] |
| Post subject: | Re: New Rig just in time for second split |
| Author: | 50fps [ Sun Dec 28, 2014 6:25 pm ] |
| Post subject: | Re: New Rig just in time for second split |
| Author: | WingCutter [ Sun Dec 28, 2014 6:36 pm ] |
| Post subject: | Re: New Rig just in time for second split |
I'm not sure but it came from GT with it as part of the stage one kit. I really like the exhaust! I'm wondering if I should ask GT for the plate covers up over the cutouts for the reverse plate support. They said they traced the few failures to a casting issue and has since fixed the problem but I saw on another thread that someone else just got a 2015 and it was solid. Any thoughts if I should just roll with it or get the modded plate before there is a problem? |
|
| Author: | 4Cody4 [ Sun Dec 28, 2014 7:22 pm ] |
| Post subject: | Re: New Rig just in time for second split |
Call gatortail. Baron called and they told him his did not need it. Mine came with the support plates bolted on. They should know based on your serial number. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|