| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Slickbottom tin cans. https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=59775 |
Page 1 of 1 |
| Author: | Woodiebuster [ Sun Feb 01, 2015 2:34 pm ] |
| Post subject: | Slickbottom tin cans. |
Looking to buy something like a 16x42, doesn't really have to be strong. .080 or .100 gauge wide open with a slick bottom. Really light. I think I remember someone like weldbilt building slick bottom boats, anybody point me in the right direction or a builder that could do something like this before SETX? |
|
| Author: | jldsc [ Sun Feb 01, 2015 2:55 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
southfork makes a slick bottom light boat. Sent from my iPhone using Tapatalk |
|
| Author: | Quackkillz [ Sun Feb 01, 2015 2:55 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
Find a weld bilt dealer, they do it on order but idk how long it takes. A buddy of mine had ordered a weld bilt with slick bottom for his 35 gdsd and he told me he had some issues with it cause they don't put enough support in the bottom so maybe that's something you can talk to them about. Sent from my SAMSUNG-SM-N900A using Tapatalk |
|
| Author: | Swampnuts [ Sun Feb 01, 2015 4:32 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
Stay away from the .80 Weldbilt, Been there done that. |
|
| Author: | TPerkins [ Sun Feb 01, 2015 5:48 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
Just curious but why? Sent from my SM-G900V using Tapatalk |
|
| Author: | Woodiebuster [ Sun Feb 01, 2015 6:16 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
| Author: | WhoDat88 [ Sun Feb 01, 2015 6:20 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
| Author: | North LA Hunter [ Sun Feb 01, 2015 9:09 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
.100 wouldn't be bad but .080 would be hard to keep from warping on the bottom. I have a feeling that has a little to do with why they put ribs on the bottom of those jon boats. Sent from my beeper |
|
| Author: | SRun5 [ Sun Feb 01, 2015 10:18 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
Stay away from weldbilt!! Had a 17 foot tunnel for a season and it sucked. It also took forever to get the piece of shit built. I went through backwoods landing Alabama. Iv seen a 1846 .100 gauge southfork perform really well! |
|
| Author: | Swampnuts [ Mon Feb 02, 2015 10:41 am ] |
| Post subject: | Re: Slickbottom tin cans. |
| Author: | Russ [ Mon Feb 02, 2015 5:16 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
Woodie, you know someone that built a little slick bottom midget boat. Is he unwilling/able to get you one done in time? |
|
| Author: | North LA Hunter [ Mon Feb 02, 2015 6:15 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
| Author: | Woodiebuster [ Mon Feb 02, 2015 6:21 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
| Author: | Russ [ Mon Feb 02, 2015 8:38 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
He hunted in the bayou out of a BLIND this year. That's progress lol |
|
| Author: | North LA Hunter [ Mon Feb 02, 2015 9:00 pm ] |
| Post subject: | Re: Slickbottom tin cans. |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|