MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

flat or "V" flat
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=59920		 Page 1 of 1
Author:  duckshagger [ Fri Feb 06, 2015 9:46 pm ]
Post subject:  flat or "V" flat
Looking at a weldbilt 18X52 or 56 with 24" sides, putting a backwater 37 longtail on it. We will run some bigger water with it about 30% of the time and shallow water the rest. My question is will the flat front be ok in chop or should I go with the V front and sacrifice mud performance? Thanks for any help :P
Author:  Hendoduckhunter [ Mon Feb 09, 2015 3:42 pm ]
Post subject:  Re: flat or "V" flat
I am looking at the "v-flat" option as well but in a 1652 or 1752 Weldbuilt . Like to hear what some of the guys who have them think as well! I spent about a half hour on the phone today with Jeremy from Backwoods landing getting educated, he was very helpful and seemed to genuinely want to get me what will work best, not a salesman kinda way either.
Author:  Alabamaduck [ Mon Feb 09, 2015 5:42 pm ]
Post subject:  Re: flat or "V" flat
I have had both flat and v and the v does cut thru the rough water good. But the v does not do as good in the shallow water. Is there some reason that y'all are set on weldbuilt boats ?
Author:  270Handiman [ Mon Feb 09, 2015 7:18 pm ]
Post subject:  Re: flat or "V" flat
V-front or V-rake doesn't hurt shallow water performance at all. A V-bottom will have I'll effects.
Author:  Hendoduckhunter [ Mon Feb 09, 2015 7:45 pm ]
Post subject:  Re: flat or "V" flat
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/