90HP Yamaha?
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Another tricked out WC Custom in the process https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=60765 |
Page 1 of 2 |
| Author: | willett [ Sun Mar 15, 2015 9:12 am ] |
| Post subject: | Another tricked out WC Custom in the process |
2048 3/16 Bottom 27" Tall 1/8" Sides Square Chine Rear Huntdeck with corner steps Full floor with gutter covers 6' Front Deck Full width top storage hatch Gun box over fuel tank Recessed Trolling motor foot pedal tray Sliding Trolling Motor Mount for MK Terrova or Powerdrive 8" cat walks Deck and Catwalks Dropped 3" below gunnel Center Console with large fully insulated baffled livewell attached Removable / Movable Rear Deck 2 - Rear Corner Gusset Speaker Mounts 2 - Mid Catwalk Speaker Mounts 2 - Front "pod" step speaker mounts Boat is at Camo Designs by Rickey getting painted and GG, then it's going to somewhere in South Texas to get a flooring called "Saf Floor" put in. Then finally back to us to finish rigging out with ALL KINDS of accessories! Sent from my iPhone using Tapatalk |
|
| Author: | baron von [ Sun Mar 15, 2015 9:27 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
someone is getting a nice rig |
|
| Author: | cb5331 [ Sun Mar 15, 2015 10:06 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Looks good, Pete! |
|
| Author: | Southern Hunter [ Sun Mar 15, 2015 10:32 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
[THUMBS UP SIGN] |
|
| Author: | lastchance [ Sun Mar 15, 2015 2:29 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Nice!! |
|
| Author: | FRANKtheTAU [ Sun Mar 15, 2015 3:07 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
I love the drop deck. |
|
| Author: | katchemall [ Sun Mar 15, 2015 3:17 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Safe flooring? |
|
| Author: | willett [ Sun Mar 15, 2015 4:06 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
http://www.safe-floor.com/ Its what the customer wants |
|
| Author: | GDSArgo [ Sun Mar 15, 2015 4:13 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Looks expensive even compared to hydroturf |
|
| Author: | Team Schmo [ Sun Mar 15, 2015 4:38 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
^^ x2 it does look durable though, wonder how much it weighs a sheet, or is it sprayed a spray in type? |
|
| Author: | GDSArgo [ Sun Mar 15, 2015 5:18 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
I read on the link that it's poured like cement one batch at a time. |
|
| Author: | Frog [ Sun Mar 15, 2015 6:54 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Very nice Pete! Looks like it was a lot of work and well thought out. |
|
| Author: | OwenDickeson [ Mon Mar 16, 2015 8:44 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
90HP Yamaha?
|
|
| Author: | BoatDR [ Mon Mar 16, 2015 8:57 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Is that trolling motor bracket strictly for removal, or is it to slide the trolling motor back so that it doesnt hang off the bow when stowed? |
|
| Author: | willett [ Mon Mar 16, 2015 10:31 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | BoatDR [ Mon Mar 16, 2015 10:54 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | Frog [ Mon Mar 16, 2015 8:03 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Pete that's awesome! I have the ipilot and hate the way it hangs over and the fact that I had to mount it on an angel. I you make a bolt on bracket so I could mount it strait down the starboard side Id buy it! |
|
| Author: | SRun5 [ Mon Mar 16, 2015 9:22 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Great idea on the trolling plate if be interested in getting one too if you start making them to sell. I have just the regular trolling motor plate. |
|
| Author: | fowllife08 [ Tue Mar 17, 2015 8:38 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Saw this boat in person at rickys, pics do it no justice its huge! Good job buddy! |
|
| Author: | Gameover [ Tue Mar 17, 2015 9:23 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
im interested in that bracket as well as i have one of these on my boat and hate how it sticks out. what prevents it from coming out of bracket when using trolling motor and keeps it from moving around while driving boat? could you send me pictures and price. i have the minn kota quick disconect mount as well if that makes a difference in way it set up |
|
| Author: | Full Throttle [ Tue Mar 17, 2015 11:41 am ] |
| Post subject: | Another tricked out WC Custom in the process |
Edit: Sorry. Didn't realize you were making these brackets to sell. Didn't mean to post a potential competitors product. Looks good btw! |
|
| Author: | jc [ Tue Mar 17, 2015 6:03 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Another good looking boat. I really like the trolling motor bracket, and I think you may be busy building several more from the sound of everyone else. |
|
| Author: | willett [ Tue Mar 17, 2015 7:30 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | katchemall [ Tue Mar 17, 2015 10:57 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
I'd be in on a bracket like that too. Nice work |
|
| Author: | SETx Longtail [ Thu Mar 19, 2015 9:00 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
really quality build as usual Pete. Ive been in a boat with that safe flooring and its pretty hard. not near as plyable as hydroturf and $$$$$!!!!! I guess it would be good if you had a lot of traffic on it (charter boat) or similar. Seems like it may hold up to the elements over time a bit better just going off what I did happen to see. Either way around, I like it!!! |
|
| Author: | BAG Hunter [ Thu Mar 19, 2015 8:02 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
how much will the hull weigh when done? |
|
| Author: | willett [ Wed Apr 01, 2015 7:31 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Paint and gator glide done Thanks to Ricky at Camo Designs! Sent from my iPhone using Tapatalk |
|
| Author: | Full Throttle [ Wed Apr 01, 2015 7:49 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Looks awesome. Did you add a little more rake to this boat? The lines on this boat are your best yet. |
|
| Author: | CLICKSTER [ Thu Apr 02, 2015 5:33 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Poor Gatortail its gonna have a tough life behind that big boat. |
|
| Author: | grnhd [ Thu Apr 02, 2015 5:56 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Boat looks awesome but I'm curious why build a 20' boat with a 48" bottom? |
|
| Author: | caver101 [ Thu Apr 02, 2015 6:28 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
I am interested in the Trolling Motor bracket as well for my Ipilot. |
|
| Author: | willett [ Thu Apr 02, 2015 6:31 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
This boat has 27" sides so the rake looks longer. We built another 2048 with 30" sides and a lot more stuff on it than this one with stage 2 GTR and still runs 30 mph with light load. This one has PD EFI with head work for now. Will have more done to it after it gets some run time. 2048 is an awesome all around boat for carrying a load, running big water and still not loose the ability to run tight stumpy areas like we have. The other 2048 I mentioned with 30" sides, that boat is also CC and the owner takes it in the Arkansas timber multiple times a year hunting. He definitely says it's not ideal for that but he said it still does great, just have to know how to drive. I've run a 2048 for 5 years and will never have anything different for the majority of the places we run. The only time it's nice to have a smaller boat around here is in really tight timber or small sloughs. Sent from my iPhone using Tapatalk |
|
| Author: | brasso [ Thu Apr 02, 2015 1:55 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | MNGunner [ Thu Apr 02, 2015 4:23 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Pretty damn cool, Pete!! |
|
| Author: | dfou [ Thu Apr 02, 2015 8:28 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Good to see a WC boat in a shape other than square  looks good
|
|
| Author: | Hernaja1 [ Fri Apr 03, 2015 5:28 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Wow fallow an insult with a compliment ^ like that makes it ok to be an ass ! |
|
| Author: | willett [ Fri Apr 03, 2015 5:57 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | Full Throttle [ Fri Apr 03, 2015 9:10 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | Frog [ Fri Apr 03, 2015 10:34 am ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
| Author: | Fooshman [ Fri Apr 03, 2015 2:52 pm ] |
| Post subject: | Re: Another tricked out WC Custom in the process |
Nice. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|