MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

Gatortrax measurement
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=63467
Page 1 of 1

Author:  Bigbuckfever [ Mon Aug 31, 2015 12:42 pm ]
Post subject:  Gatortrax measurement

I'm sure this has been brought up before. How are gtrax boats measured? The width is measured w/o chine? Correct? And the length is w/o the hd? So an 1844 is essentially a 19'6" x48"? My buddy is trying to figure it out. Thanks


Sent from my iPhone using Tapatalk

Author:  flint87 [ Mon Aug 31, 2015 1:07 pm ]
Post subject:  Re: Gatortrax measurement

You got the length right. The width is measured at the top of the chine at the transom I believe .


Sent from my iPhone using Tapatalk

Author:  Pulpwood [ Mon Aug 31, 2015 1:30 pm ]
Post subject:  Re: Gatortrax measurement

Mine was about mid way of the curve in the chine

Sent from my SM-G900V using Tapatalk

Author:  BassmasterCia [ Mon Aug 31, 2015 4:11 pm ]
Post subject:  Re: Gatortrax measurement

Haha mine is about an inch above the chine. I ordered a 1650 and basically got a 1656 or 60. One thing about it though, it dont take much water to make her float

Author:  MDMarsh [ Wed Sep 02, 2015 10:42 am ]
Post subject:  Re: Gatortrax measurement

My 38 is 38" across the actual flat bottom. Top of the chine is something like 46" from what I remember

Author:  JD145 [ Wed Sep 02, 2015 10:47 am ]
Post subject:  Re: Gatortrax measurement

Pretty sure you measure the floor at the water line, the huntdeck is 20 inches not included in the length of the boat

Author:  Bigbuckfever [ Thu Sep 03, 2015 6:41 am ]
Post subject:  Re: Gatortrax measurement

Thanks!


Sent from my iPhone using Tapatalk

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/