| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Beware of Revolutionary New Designs https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=65954 |
Page 1 of 4 |
| Author: | rob_E [ Tue Feb 23, 2016 9:18 am ] |
| Post subject: | Beware of Revolutionary New Designs |
This bs was installed on the bottom of my buddy(Dylan Bagwell's) boat by Cory over at cottonmouth customs. Cory told him it was necessary to provide lift on his custom 19x56 and charged him an additional $1,000.00 for it with out asking. After it was installed It was sold to my buddy as Corry's Revolutionary new design that was supposed to act like a pad on a bass boat but all it did was drag him down big time. So far Dylan has had to have his stage 2 motor mods redone, repair his transom, and now cut this crap off the bottom of his boat. The new rig cost him $30,000.00 and he has had to make an additional 4K worth of changes to get his boat where it needs to be. Hopefully Not saying all new things are bad but Just beware of some of these revolutionary new boat builders they might take you for a ride. And FYI Dylan has exhausted all his resources to get Cory to make it right other than a law suit with no corrective actions by Cory so he asked me to let the MMT world know so nobody else gets the shaft. |
|
| Author: | BlueShamu [ Tue Feb 23, 2016 9:23 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Yeaaaaahhhhhhhh......I don't see that working for a mudboat.....and I'm a guy always thinking outside the box. Sent from my iPhone using Tapatalk |
|
| Author: | DeoVindice [ Tue Feb 23, 2016 9:41 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
damn...that's a shame |
|
| Author: | txmudcutter [ Tue Feb 23, 2016 9:54 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Yeah that really sucks I would be pissed. What did Corey say about correcting it? Or did he not address it at all? |
|
| Author: | msm8281 [ Tue Feb 23, 2016 10:01 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
The dude that he originally worked for screwed some people by charging them full price before building boats and never built them. Sent from my SAMSUNG-SM-G925A using Tapatalk |
|
| Author: | DeoVindice [ Tue Feb 23, 2016 10:04 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | Andy [ Tue Feb 23, 2016 10:16 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
That wouldn't end well down here. You'd find yourself floating in the Everglades or in the hospital. |
|
| Author: | rob_E [ Tue Feb 23, 2016 11:36 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | 3rd Coast Killer [ Tue Feb 23, 2016 11:41 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Holy Shit show. That looks like crap. Sorry your buddy had to deal with this. Especially on new rig. |
|
| Author: | Hernaja1 [ Tue Feb 23, 2016 11:47 am ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
im so happy this did not happen to me on my build. That's blows ! |
|
| Author: | mizzippi jb [ Tue Feb 23, 2016 3:35 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Somebody got some money tied up in those wacker trowel Machines! So what was going on there? Like an add on taper type deal that killed out toward the rake of the boat? |
|
| Author: | flint87 [ Tue Feb 23, 2016 3:50 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | mizzippi jb [ Tue Feb 23, 2016 4:42 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Hell no, I'm white. I don't get on those damn things. But my mezkins could smoke that guy |
|
| Author: | Hernaja1 [ Tue Feb 23, 2016 4:49 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Hey Rob_E how long has he had this rig ? The GG looks like crap or is that just solid paint ? |
|
| Author: | fishnmoney [ Tue Feb 23, 2016 4:56 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | fishnmoney [ Tue Feb 23, 2016 5:06 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | mizzippi jb [ Tue Feb 23, 2016 5:13 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Well I can tell you that there's no way the boat would have followed me home if it had some shit like that on the bottom of it and I didn't agree to it, and I damn sure wouldn't have thrown another grand his way to n1ggar it up like that. I am curious as to what all that god awful mess looked like before they started tearing it off. |
|
| Author: | fishnmoney [ Tue Feb 23, 2016 5:31 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Looked like shit but it did turn on a dime, lol |
|
| Author: | rob_E [ Tue Feb 23, 2016 5:33 pm ] |
| Post subject: | Beware of Revolutionary New Designs |
Yea me either JB but Dylan didn't know better and Cory sold him on it. Then there was a year of new cams, transom height and angle changes, and every other experiment in the book with no help from Cory. Once Dylan was finally convinced the design was shitty the money was already spent and he was SOL |
|
| Author: | rob_E [ Tue Feb 23, 2016 5:53 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Today's progress |
|
| Author: | msm8281 [ Tue Feb 23, 2016 5:57 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Man thats terrible. He ever thought of getting getting a plain jane boat built for about 4k? Sent from my SAMSUNG-SM-G925A using Tapatalk |
|
| Author: | mizzippi jb [ Tue Feb 23, 2016 6:05 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Still trying to picture the "before" look. Ribs on the sides and that middle part going up to a point at the rake was raised? Like a reverse tunnel hull? |
|
| Author: | fishnmoney [ Tue Feb 23, 2016 7:06 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | mizzippi jb [ Tue Feb 23, 2016 7:26 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | fishnmoney [ Tue Feb 23, 2016 7:34 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | rob_E [ Tue Feb 23, 2016 7:39 pm ] |
| Post subject: | Beware of Revolutionary New Designs |
Pics of original work before removal -some paint obviously |
|
| Author: | kirk [ Tue Feb 23, 2016 7:41 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | rob_E [ Tue Feb 23, 2016 7:44 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Supposed to act like a pad on a bass boat. Once you hit said speed only the pad is touching the water = more speed. It did not work as intended fasted d ran with a stage 2 GTR was 28 empty like 22-23 loaded down |
|
| Author: | Hernaja1 [ Tue Feb 23, 2016 7:45 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | rob_E [ Tue Feb 23, 2016 7:46 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Here was the transom Dylan had to pay to have to have fixed. Scooped up mud when reversing and was way too high. |
|
| Author: | cb5331 [ Tue Feb 23, 2016 7:48 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Wtf |
|
| Author: | msm8281 [ Tue Feb 23, 2016 7:50 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
I never thought that transom design would be any good. First time i actually heard it sucked though. No one ever really bad mouthed the guy until now. Sent from my SAMSUNG-SM-G925A using Tapatalk |
|
| Author: | swamp_fox [ Tue Feb 23, 2016 8:04 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
I'm trying not to be the devil's advocate or sound like a dick. So I'll just say thanks for giving us the heads up. Sent from my SAMSUNG-SM-G890A using Tapatalk |
|
| Author: | jakehawk9 [ Tue Feb 23, 2016 8:06 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Fuck that. Guy screwed over alot of people being a good salesman, and a terrible boat builder. Sorry to everyone this guy shafted. Hope he's out of business soon It's simple. get a mud motor. shoot ducks in the face. |
|
| Author: | Hernaja1 [ Tue Feb 23, 2016 8:09 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
WTF ????? That supposed to be a 3x tapered or round chine or what ??? |
|
| Author: | msm8281 [ Tue Feb 23, 2016 8:15 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
One from the good old days. Some will remember this. If you read till the end Cory was the welder from another boat crook years ago. Seems like he picked up some bad habits. viewtopic.php?f=2&t=33201 |
|
| Author: | swamp_fox [ Tue Feb 23, 2016 8:25 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | msm8281 [ Tue Feb 23, 2016 8:48 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
| Author: | med [ Tue Feb 23, 2016 9:14 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Looks like a lot of work too. What a mess. |
|
| Author: | CJB [ Tue Feb 23, 2016 9:15 pm ] |
| Post subject: | Re: Beware of Revolutionary New Designs |
Junk |
|
| Page 1 of 4 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|