| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| sportsmans fabrication https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=66578 |
Page 1 of 1 |
| Author: | jtwilliams [ Thu Apr 14, 2016 10:09 pm ] |
| Post subject: | sportsmans fabrication |
what do yall know about them? I have been looking at a used 18x48 a boy had bought and kept 10 months and then went and bought a 17x48 (says he wanted more speed) claims the 18x48 he had from sportsmans fab ran 33 with 2 people with and upgraded 37efi gtr. I have a 35gtr with calens heads, cam and stainless works exhaust. What do you guys think if its a pretty good deal. I have thought about calling uncle j to get a price. I really want a 17x50 to be honest tapered chine. i know jason doesnt really do the tapered chines though. |
|
| Author: | JLACOUR [ Thu Apr 14, 2016 10:13 pm ] |
| Post subject: | sportsmans fabrication |
Casey builds good boats and takes care of his people. Should be fine as long as it wasn't beat to crap. He has been building boats for a long time. |
|
| Author: | jtwilliams [ Fri Apr 15, 2016 6:49 am ] |
| Post subject: | Re: sportsmans fabrication |
thanks just curious |
|
| Author: | Zeek569 [ Fri Apr 15, 2016 8:04 am ] |
| Post subject: | Re: sportsmans fabrication |
He builds a solid boat for sure but they don't like weight in them. |
|
| Author: | jtwilliams [ Sat Apr 16, 2016 2:45 pm ] |
| Post subject: | Re: sportsmans fabrication |
Zeke what kind of speeds do you get in your 18x48. And you say don't like a load? What chine do you have |
|
| Author: | chucknorrisvsbarney [ Sat Apr 16, 2016 7:01 pm ] |
| Post subject: | Re: sportsmans fabrication |
Call Jason. I know he will do tapered chines because I asked him to quote me tapered chines on the boat that he is currently building for me. I decide not to go tapered cause I wanted minimum draft, but he will do it if that's what you want. |
|
| Author: | mizzippi jb [ Sun Apr 17, 2016 7:24 am ] |
| Post subject: | Re: sportsmans fabrication |
Jason as in uncle jason? Sent from my SM-G900V using Tapatalk |
|
| Author: | jtwilliams [ Sun Apr 17, 2016 4:11 pm ] |
| Post subject: | Re: sportsmans fabrication |
ill give him a call in the morning before i decide on this used one. |
|
| Author: | jtwilliams [ Sun Apr 17, 2016 7:01 pm ] |
| Post subject: | Re: sportsmans fabrication |
uncle j where ya at |
|
| Author: | brickgw [ Sun Apr 17, 2016 7:57 pm ] |
| Post subject: | Re: sportsmans fabrication |
Patience man! Lol |
|
| Author: | Zeek569 [ Mon Apr 18, 2016 3:46 pm ] |
| Post subject: | Re: sportsmans fabrication |
| Author: | jtwilliams [ Thu Apr 21, 2016 8:45 pm ] |
| Post subject: | Re: sportsmans fabrication |
What do you expect this 18x50 should run. Motor is stage two Karen's heads cam stainless works. I'm going to add mikuni after I get boat. This is a 35gtr with all this |
|
| Author: | brickgw [ Thu Apr 21, 2016 11:00 pm ] |
| Post subject: | Re: sportsmans fabrication |
The Karen I'm thinking of does alot better with stage 2 haircuts than briggs work....but that's none of my business. |
|
| Author: | Zeek569 [ Fri Apr 22, 2016 11:22 am ] |
| Post subject: | Re: sportsmans fabrication |
| Author: | mizzippi jb [ Fri Apr 22, 2016 2:15 pm ] |
| Post subject: | Re: sportsmans fabrication |
What kind of grind does Karen put on her cam lobes? I bet she's dirty Sent from my SM-G900V using Tapatalk |
|
| Author: | UNCLE-J [ Sun Apr 24, 2016 8:38 am ] |
| Post subject: | Re: sportsmans fabrication |
Someone asked about me? Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|