| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Shopping for a dual rig https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=66860 |
Page 1 of 1 |
| Author: | rockmm [ Thu May 12, 2016 9:58 pm ] |
| Post subject: | Shopping for a dual rig |
What's everyone's opinion on a 2060 tdx vs a 2060 sbx both with dual 37's. There's about a 400lb weight difference Sent from my iPhone using Tapatalk |
|
| Author: | brycecheramie [ Wed May 18, 2016 2:25 am ] |
| Post subject: | Re: Shopping for a dual rig |
Do your research. The Prodrive SBX has a fully welded floor that will not allow the boat to sink if filled with water. It also has 2 drain hole in the back of the boat, above the water line, to drain any water that does get in the boat. With dual motors, I would personally get the SBX. OR, see if you can get the TDX and make it a SBX. |
|
| Author: | Crews [ Wed May 18, 2016 5:50 am ] |
| Post subject: | Re: Shopping for a dual rig |
I have a 24x60 SBX with duals. The self bailing hull is absolutely awesome, and there is plenty of power to push it. Never have to worry about water in the boat. I would strongly suggest the SBX. Sent from my iPhone using Tapatalk |
|
| Author: | rockmm [ Wed May 18, 2016 5:51 am ] |
| Post subject: | Re: Shopping for a dual rig |
Never thought about adding a timber deck step to a SBX. Will the extra 400lbs rob a lot of speed Sent from my iPhone using Tapatalk |
|
| Author: | Frog [ Wed May 18, 2016 10:15 am ] |
| Post subject: | Re: Shopping for a dual rig |
cant have both but they are both fine rigs |
|
| Author: | SETx Longtail [ Wed May 18, 2016 10:21 am ] |
| Post subject: | Re: Shopping for a dual rig |
I'd just about bet if someone was willing to pay for it, PD would weld the floor in a TDX boat, and cut the drains. That's about the only difference right? |
|
| Author: | BlueShamu [ Wed May 18, 2016 12:47 pm ] |
| Post subject: | Re: Shopping for a dual rig |
Saw one on LAS that I thought about buying...just for the two motors and trailer. Heck of a deal. Sent from my iPhone using Tapatalk |
|
| Author: | Crews [ Wed May 18, 2016 1:18 pm ] |
| Post subject: | Re: Shopping for a dual rig |
| Author: | Hernaja1 [ Thu May 19, 2016 8:41 pm ] |
| Post subject: | Re: Shopping for a dual rig |
You will be presently surprised how much a dual rig can handle. Weight it down and it won't skip a beat. If it's pushing my heavy ass rig 33 bunping 34 yours won't notice that little 400lbs |
|
| Author: | flint87 [ Fri May 20, 2016 11:13 am ] |
| Post subject: | Re: Shopping for a dual rig |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|