4400 rpm and 25 mph might be a dead give away for gen 3
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Prodrive gen stamp missing https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=67864 |
Page 1 of 1 |
| Author: | woodie_slayer [ Sat Aug 13, 2016 12:12 pm ] |
| Post subject: | Prodrive gen stamp missing |
I just purchased a supposedly gen 4 prodrive but it's missing a g4 stamp on the lower unit.is there any way to tell any other way. |
|
| Author: | dead animal [ Sat Aug 13, 2016 2:35 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
write down serial # and call prodrive and ask them? |
|
| Author: | Will C [ Sat Aug 13, 2016 3:45 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
4400 rpm and 25 mph might be a dead give away for gen 3
|
|
| Author: | brickgw [ Sat Aug 13, 2016 4:07 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
| Author: | wade_660 [ Sat Aug 13, 2016 4:41 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
What year? Sent from my iPhone using Tapatalk |
|
| Author: | woodie_slayer [ Sat Aug 13, 2016 5:15 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
2015,it idles from 990-1020rpm.I'm installing it tonight then trying it out tomorrow.I'll give some updates but it's kind of weird not having a stamp of generation info. |
|
| Author: | JphIII [ Sun Aug 14, 2016 9:10 am ] |
| Post subject: | Re: Prodrive gen stamp missing |
I didn't think they were selling gen IV's in 2015. |
|
| Author: | OwenDickeson [ Mon Aug 15, 2016 3:12 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
What is the PD # on the transom bracket? Sent from my XT1254 using Tapatalk |
|
| Author: | woodie_slayer [ Tue Aug 16, 2016 4:09 am ] |
| Post subject: | Re: Prodrive gen stamp missing |
Owen iI won't be home from work until later tonight,but I'll post it up...well guys,I tried it out at the lake and went out 200 yards before it cut off on me.it would rev up in idle good but when I got it gear it won't rev past 2400 rpm.im thinking its a fuel line issue but I'm not sure. |
|
| Author: | OwenDickeson [ Tue Aug 16, 2016 8:18 am ] |
| Post subject: | Re: Prodrive gen stamp missing |
Pop the valve covers and make sure the push rods are seated too, it will just take a few minutes. Sent from my XT1254 using Tapatalk |
|
| Author: | woodie_slayer [ Wed Aug 17, 2016 8:49 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
Bump |
|
| Author: | woodie_slayer [ Wed Aug 17, 2016 8:53 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
Bump |
|
| Author: | flint87 [ Wed Aug 17, 2016 8:54 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
| Author: | flint87 [ Wed Aug 17, 2016 8:57 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
It's the most shittest motor ever and I freaking give up on this crap. Wtf are you? 12? Go back out to the garage and start throwing wrenches at shit like a real man. Sent from my iPhone using Tapatalk |
|
| Author: | cb5331 [ Wed Aug 17, 2016 8:59 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
12 1/2 bitch |
|
| Author: | BERNIE255 [ Wed Aug 17, 2016 9:06 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
Thake the prop off, it's bogging down the motor. Should plain out now. Sent from my iPhone using Tapatalk |
|
| Author: | flint87 [ Thu Aug 18, 2016 5:53 am ] |
| Post subject: | Re: Prodrive gen stamp missing |
| Author: | OwenDickeson [ Thu Aug 18, 2016 11:28 am ] |
| Post subject: | Re: Prodrive gen stamp missing |
| Author: | woodie_slayer [ Thu Aug 18, 2016 5:14 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
I got to do that come saturday once I get a day off.i don't know really how to do it either so any help is welcomed. |
|
| Author: | woodie_slayer [ Mon Aug 22, 2016 5:24 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
Well I spoke to Andrew at muddy bay and he helped me out tremendously.they fixed the problem and I should be back on the water some time here soon.we had a miscommunication that we sorted out.I'm sorry for trashing their name and give props to him for going above and beyond to help their customers. |
|
| Author: | OwenDickeson [ Mon Aug 22, 2016 6:30 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
What was the problem? Sent from my XT1254 using Tapatalk |
|
| Author: | brycecheramie [ Mon Aug 22, 2016 11:58 pm ] |
| Post subject: | Re: Prodrive gen stamp missing |
And why does a company have to have their name bashed online, before doing right by their customers?? 
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|