| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 2nd boat for the 25GTR https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=68071 |
Page 1 of 1 |
| Author: | reharbert [ Tue Aug 30, 2016 12:04 pm ] |
| Post subject: | 2nd boat for the 25GTR |
I had a boat built last year by Uncle J. Great boat, no complaints. Solid. I'll likely never sell it. I'm going to put a modded 35 or a big outboard on it. I'm going to get a lighter and faster boat for the 25. The current boat is a 17x48 with 3/16 bottom, square chine, 4ft deck w/storage, hunt deck, and single seat rear storage. The new boat will be 1/8th and as basic as can be. Any suggestions on size and design? I'll probably keep the hunt deck, but lose the hinged storage on the front deck and the built in rear seat/storage. |
|
| Author: | SETx Longtail [ Tue Aug 30, 2016 12:11 pm ] |
| Post subject: | Re: 2nd boat for the 25GTR |
If you're going to do all 1/8, save some extra weight somewhere else to be used in the bottom in the way of extra bracing/stringers. |
|
| Author: | reharbert [ Tue Aug 30, 2016 12:36 pm ] |
| Post subject: | Re: 2nd boat for the 25GTR |
I'm tempted to even go the .100 route. I've been reading everything I can on here tied to boats for the 25. |
|
| Author: | TPerkins [ Tue Aug 30, 2016 2:22 pm ] |
| Post subject: | Re: 2nd boat for the 25GTR |
Jay Dore is the name that comes to mind.. Sent from my SM-G920V using Tapatalk |
|
| Author: | Russ [ Tue Aug 30, 2016 6:01 pm ] |
| Post subject: | Re: 2nd boat for the 25GTR |
For that motor, .100 ought to be fine. Thicker isn't always required, especially when you aren't putting a 35 on it. Many builders won't go thinner than 1/8th, though. |
|
| Author: | reharbert [ Wed Aug 31, 2016 6:10 am ] |
| Post subject: | Re: 2nd boat for the 25GTR |
I'm either going to have Jason build it in 1/8th, or possibly build it myself. At this point I'm just trying to decide on a size. 16.5 x 46 seems to be the hot hull for the 25, but I was leaning towards narrower and longer. Possibly 18x40 |
|
| Author: | TPerkins [ Wed Aug 31, 2016 11:22 am ] |
| Post subject: | Re: 2nd boat for the 25GTR |
Jeff (El jefe) has an 1840 built by Willett 3 years back. Sent from my SM-G920V using Tapatalk |
|
| Author: | reharbert [ Wed Aug 31, 2016 3:24 pm ] |
| Post subject: | Re: 2nd boat for the 25GTR |
I came across some post he made. I was going to contact him, but he hasn't visited the site in quite a while now. (says he lives in Beaumont too) |
|
| Author: | SETx Longtail [ Wed Aug 31, 2016 4:46 pm ] |
| Post subject: | Re: 2nd boat for the 25GTR |
I feel like a light, but well braced 1840 (maybe 42) with .125 bottom and all else built from .100 would be a really well matched hull for that Robin. A square or single taper chine will be your friend to create lift and help you carry loads better with minimal Hp. This all depends on the intended use of the rig of course wether it's primarily hunting only, hunting/fishing etc... |
|
| Author: | kcudslayer [ Thu Sep 01, 2016 7:25 am ] |
| Post subject: | Re: 2nd boat for the 25GTR |
I 2nd Jay Dore mans a wizard with light boats for the 25, good thing is his production has really sped up since he's in a shop with help |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|