| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Battery and Bilge https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=68091 |
Page 1 of 1 |
| Author: | Marshmob [ Wed Aug 31, 2016 8:06 pm ] |
| Post subject: | Battery and Bilge |
Time to adjust a few things and was wondering what's the best way to secure/mount battery trays and also bilges on my 18' gtr with hunt deck. Looking to keep both batteries in the back. Thanks |
|
| Author: | dead animal [ Wed Aug 31, 2016 9:38 pm ] |
| Post subject: | Re: Battery and Bilge |
on my old boss's express, the boat dealer just ran screws thru the floor of his brand new boat to secure the bilge pump. if I remember right he screwed the boat to the wooded bunk on the trailer. 3 times. lol do not do this. |
|
| Author: | teammarshmafia [ Thu Sep 01, 2016 4:29 am ] |
| Post subject: | Re: Battery and Bilge |
On the bilge I just use an epoxy to glue the base down just be sure it's where you want it. I like the tsunami pumps cause you can buy a new cartridge if it goes out and just snap the new pump into the old housing As far as the battery trays you'll probly have to try to go across the ribs somehow. . . I guess it depends on your boat Sent from my SAMSUNG-SM-G890A using Tapatalk |
|
| Author: | Mallards Only [ Fri Sep 02, 2016 6:47 am ] |
| Post subject: | Re: Battery and Bilge |
| Author: | Delta1389 [ Fri Sep 02, 2016 8:13 am ] |
| Post subject: | Re: Battery and Bilge |
For my bilge I had a bracket made that I secured the pump to that holds it just off the bottom of the boat. The bracket is sort of L shaped and screws into the top of my ribs in the back where they are exposed. As far as the battery I have a box built into the boat that the plastic battery box is strapped to. |
|
| Author: | Marshmob [ Sat Sep 03, 2016 7:21 am ] |
| Post subject: | Re: Battery and Bilge |
Thanks for the ideas. I might try the L bracket. We hunt in boot sucking mud so definitely have to keep the pump off the floor. |
|
| Author: | Plandr5 [ Tue Jan 16, 2018 7:25 pm ] |
| Post subject: | Re: Battery and Bilge |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|