| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Single Axle shackle angle question https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=68392 |
Page 1 of 1 |
| Author: | 11Bravo [ Sun Sep 25, 2016 2:06 pm ] |
| Post subject: | Single Axle shackle angle question |
I posted how my springs shattered in a prior post and left my trailer sitting in the street after it spit my axle and wheels out the back. Today I finished up installing new springs with probably to high a rating. The axle is a 3500# one so I got springs to match. After the install the shackles are pointed slightly forward instead of the usual rearward. I found the last diagram on the net that in my position now the ride softens. Look at the photos and give your opinions. I can grind off the rear hanger and re-weld, but do I need to? Or am I reading the chart wrong? |
|
| Author: | Russ [ Sun Sep 25, 2016 2:45 pm ] |
| Post subject: | Re: Single Axle shackle angle question |
I'd leave it as is. |
|
| Author: | jc [ Sun Sep 25, 2016 5:24 pm ] |
| Post subject: | Re: Single Axle shackle angle question |
You should be fine. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|