| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Handle length for copperhead 18 or 23 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=68438 |
Page 1 of 1 |
| Author: | mikebyers [ Wed Sep 28, 2016 6:55 pm ] |
| Post subject: | Handle length for copperhead 18 or 23 |
Hey Guys I currently am running a 25hp Godevil long tail on a modified vee 1542 boat. The biggest problem I am having is the handle length. If I measure from the tip of the handle to the back of the transom it is 55". When I am hunting and I have my blind up it is extremely hard to turn tightly due to the handle swing and it hitting my blind before I can get it on a tight turn. I am considering getting a copperhead but would like to hear if anyone can measure theirs from the tip of the handle to the back of the transom. Or would it be stupid to cut down the handle length? chime in if you have an opinion. |
|
| Author: | Glades Ranger [ Thu Sep 29, 2016 3:20 am ] |
| Post subject: | Re: Handle length for copperhead 18 or 23 |
I have only had longtails for the past thirty years...I would consider getting a quick deploy/collapse blind rather than switch motors. I encountered too many problems running with the blind up so I don't do it any more. I try and drop the ducks real close to the boat! 
|
|
| Author: | BERNIE255 [ Thu Sep 29, 2016 1:35 pm ] |
| Post subject: | Re: Handle length for copperhead 18 or 23 |
Copperhead has adjustable handles Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|