MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

Safe floor removal
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=69811		 Page 1 of 1
Author:  Quack N Stack [ Mon Feb 13, 2017 2:44 pm ]
Post subject:  Safe floor removal
Anyone any ideas on how to get this crap out? I tried pouring gas on it hoping it would eat the rubber but didn't work like I thought it would..its like the material on a jogging track.IMG_0968.JPG


Sent from my iPhone using Tapatalk
Author:  reharbert [ Mon Feb 13, 2017 2:49 pm ]
Post subject:  Re: Safe floor removal
Increase gas quantity.

Add fire.
Author:  reharbert [ Mon Feb 13, 2017 2:49 pm ]
Post subject:  Re: Safe floor removal
Maybe a heat gun with a scraper attachment. Looks like a PITA.
Author:  rob_rides_03 [ Mon Feb 13, 2017 7:10 pm ]
Post subject:  Re: Safe floor removal
Start by finding the guy that put that in there and punch him in the face
Author:  Quack N Stack [ Mon Feb 13, 2017 8:21 pm ]
Post subject:  Re: Safe floor removal
Author:  Quack N Stack [ Mon Feb 13, 2017 8:22 pm ]
Post subject:  Re: Safe floor removal
Started to get it....this took about 5 gallons of gas.... IMG_0972.JPG


Sent from my iPhone using Tapatalk
Author:  reharbert [ Tue Feb 14, 2017 7:49 am ]
Post subject:  Re: Safe floor removal
pull the plug, catch the gas in a bucket, and reuse.

I dont know what else I was try if it was mine. I'd probably start cutting it out in chunks with a box cutter and get as close to the floor as possible. Maybe use a floor or wall scraper with a sharp blade.

Something like this.

https://store.armorpoxy.com/mm5/graphic ... %20med.jpg
Author:  CypressCritter [ Tue Feb 14, 2017 9:01 am ]
Post subject:  Re: Safe floor removal
a good heat gun and a lot of scrapping. would be my best guess.
Author:  B Alsabrook [ Tue Feb 14, 2017 10:20 am ]
Post subject:  Re: Safe floor removal
Try an air chisel.
Author:  Quack N Stack [ Tue Feb 14, 2017 10:29 am ]
Post subject:  Re: Safe floor removal
I tried scraping it put with a wall scrape, chisle, grinder with a wire wheel, and gas. The grinder worked ok but its very very time consuming and was constantly pelting me with timy pieces of rubber..going to try soaking it all with gas a power wash it next...
Author:  b.latiolais [ Tue Feb 14, 2017 10:43 am ]
Post subject:  Re: Safe floor removal
Try contacting someone who installs safe floor and ask them how to remove it.
Author:  Quack N Stack [ Tue Feb 14, 2017 11:09 am ]
Post subject:  Re: Safe floor removal
I was told a hammer and a chisel when i called.....IMG_0973.JPG



Sent from my iPhone using Tapatalk
Author:  Hernaja1 [ Tue Feb 14, 2017 11:38 am ]
Post subject:  Re: Safe floor removal
Try xylene
Author:  TPerkins [ Tue Feb 14, 2017 1:24 pm ]
Post subject:  Re: Safe floor removal
Author:  rob_rides_03 [ Tue Feb 14, 2017 8:25 pm ]
Post subject:  Re: Safe floor removal
maybe try one of those ice melting torches if you went real easy with it to soften it up. I'd bet it would come off in big chunks.
Author:  Brokeknee [ Wed Feb 15, 2017 12:06 am ]
Post subject:  Re: Safe floor removal
Have you tried one of these? It worked wonders on glued linoleum floors at my house.
Author:  Darryle [ Wed Feb 15, 2017 6:00 am ]
Post subject:  Re: Safe floor removal
I was thinking this might be a good option and it's cheap
Author:  Quack N Stack [ Wed Feb 15, 2017 6:40 am ]
Post subject:  Re: Safe floor removal
Author:  huck Finn [ Wed Feb 15, 2017 7:30 am ]
Post subject:  Re: Safe floor removal
Author:  Frog [ Wed Feb 15, 2017 8:43 am ]
Post subject:  Re: Safe floor removal
Author:  Brokeknee [ Wed Feb 15, 2017 9:12 am ]
Post subject:  Re: Safe floor removal
Author:  Quack N Stack [ Wed Feb 15, 2017 9:14 am ]
Post subject:  Re: Safe floor removal
Author:  flint87 [ Wed Feb 15, 2017 9:44 am ]
Post subject:  Re: Safe floor removal
Author:  cb5331 [ Wed Feb 15, 2017 9:45 am ]
Post subject:  Re: Safe floor removal
Author:  Quack N Stack [ Wed Feb 15, 2017 12:18 pm ]
Post subject:  Re: Safe floor removal
Figured it out...sawzall and scraper attachment . Got this done in about 2 minutes IMG_0976.JPGIMG_0977.JPG


Sent from my iPhone using Tapatalk
Author:  reharbert [ Wed Feb 15, 2017 12:26 pm ]
Post subject:  Re: Safe floor removal
amazing on the forearms?
Author:  Quack N Stack [ Wed Feb 15, 2017 12:40 pm ]
Post subject:  Re: Safe floor removal
IMG_0978.JPG


Sent from my iPhone using Tapatalk
Author:  flint87 [ Wed Feb 15, 2017 1:11 pm ]
Post subject:  Re: Safe floor removal
How much does safe floor cost? Doesn't say on their site so must be high as hell


Sent from my iPhone using Tapatalk
Author:  Quack N Stack [ Wed Feb 15, 2017 1:18 pm ]
Post subject:  Re: Safe floor removal
Author:  Quack N Stack [ Wed Feb 15, 2017 1:52 pm ]
Post subject:  Re: Safe floor removal
Much better. Forearms and back gonna be sore for a week! IMG_0980.JPG


Sent from my iPhone using Tapatalk
Author:  rob_rides_03 [ Wed Feb 15, 2017 5:03 pm ]
Post subject:  Re: Safe floor removal
That's brutal man. Nice job on getting that shit out.
Author:  kirk [ Wed Feb 15, 2017 8:09 pm ]
Post subject:  Re: Safe floor removal
Man at least move that thing in some shade haha


Sent from my iPad using Tapatalk
Author:  Quack N Stack [ Wed Feb 15, 2017 9:42 pm ]
Post subject:  Re: Safe floor removal
Author:  BERNIE255 [ Wed Feb 15, 2017 9:45 pm ]
Post subject:  Re: Safe floor removal
Author:  Quack N Stack [ Wed Feb 15, 2017 9:48 pm ]
Post subject:  Re: Safe floor removal
Author:  scarygary [ Wed Feb 15, 2017 9:57 pm ]
Post subject:  Re: Safe floor removal
Too bad you didn't have access to a hydroblast. I have a friend that took a 10k hydro blaster with a spin jet on the gun peel up a textured floor in an aluminum boat and the floor looked like it was newly installed


Sent from my iPhone using Tapatalk
Author:  Hernaja1 [ Thu Feb 16, 2017 5:37 pm ]
Post subject:  Re: Safe floor removal
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/