Author |
Message |
Pimptibbs
MMT Member
Joined: Tue Aug 07, 2012 11:56 am Posts: 9
|
 Upgraded motor, new prop size???
I replaced my 13hp Honda with a 23hp Vanguard on my homemade LT. I went out and was running a 9X5 prop and it just seems like theirs so much more potential for speed. Ive had a few buddies say 10X8 and a few say 11X10... Im sure most on here know much more than they do so im wondering what you guys think.
|
Tue Nov 19, 2013 4:36 pm |
|
 |
Trousertrout
MMT 1000 Club
Joined: Tue Oct 18, 2011 3:18 pm Posts: 1060 Location: Ohio-The land of few ducks
|
 Re: Upgraded motor, new prop size???
I got a 9x6 on mine. What brand prop? What speeds? What hull? What kind of load?
_________________ 23 swomp/ 1542 tracker
|
Tue Nov 19, 2013 6:13 pm |
|
 |
Pimptibbs
MMT Member
Joined: Tue Aug 07, 2012 11:56 am Posts: 9
|
 Re: Upgraded motor, new prop size???
Its a hill marine prop. Im not sure on the speeds but I run it on a 16 ft flat bottom. The load was heavier than usual with 3 guys a dog and all our hunting gear. The difference between my old motor and the new one just wasnt as big as I thought it would be and my buddies mentioned replacing the prop for a bigger one.
|
Tue Nov 19, 2013 6:26 pm |
|
 |
Trousertrout
MMT 1000 Club
Joined: Tue Oct 18, 2011 3:18 pm Posts: 1060 Location: Ohio-The land of few ducks
|
 Re: Upgraded motor, new prop size???
Do you know rpm's. With that load I would probably be around 15mph in a 1542.
_________________ 23 swomp/ 1542 tracker
|
Tue Nov 19, 2013 6:29 pm |
|
 |
Pimptibbs
MMT Member
Joined: Tue Aug 07, 2012 11:56 am Posts: 9
|
 Re: Upgraded motor, new prop size???
I dont, my Tiny Tach will be here tomorrow and i'll throw it on and go run it and let you know...
|
Wed Nov 20, 2013 6:46 pm |
|
 |
OlSchool
MMT Pro Member
Joined: Sun Jan 06, 2013 4:24 pm Posts: 384 Location: Louisiana
|
 Re: Upgraded motor, new prop size???
what is the bottom width? 9x6 Godevil prop works best for me. 23LT on 16x42
|
Wed Nov 20, 2013 6:50 pm |
|
 |
Trousertrout
MMT 1000 Club
Joined: Tue Oct 18, 2011 3:18 pm Posts: 1060 Location: Ohio-The land of few ducks
|
 Re: Upgraded motor, new prop size???
I am interested to get a Gd prop. A lot of people are saying there is not enough cup in these backh2o props
_________________ 23 swomp/ 1542 tracker
|
Wed Nov 20, 2013 6:52 pm |
|
 |
50fps
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
 Re: Upgraded motor, new prop size???
I ran a 9X7 GD prop on my 23 GDLT, but that was on a 1542 flat. I then switched to a Stumpjumper which lasted longer than the GD and then to a BBlades for even longer life.
|
Thu Nov 21, 2013 9:02 am |
|
 |
Pimptibbs
MMT Member
Joined: Tue Aug 07, 2012 11:56 am Posts: 9
|
 Re: Upgraded motor, new prop size???
|
Fri Nov 22, 2013 11:17 am |
|
 |
DD
MMT Pro Member
Joined: Thu Feb 14, 2013 7:28 am Posts: 179 Location: Central FL
|
 Re: Upgraded motor, new prop size???
_________________ 16/42 crawfish skiff - 31GDLT
|
Fri Nov 22, 2013 11:25 am |
|
 |
50fps
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
 Re: Upgraded motor, new prop size???
|
Fri Nov 22, 2013 1:24 pm |
|
 |
|