| Author |
Message |
|
rodw
MMT Member
Joined: Mon Sep 29, 2014 3:10 pm
Posts: 9
Location: Moncks Corner, SC
|
 mb35 prop suggestion? What is the best prop to put on mb 35? Would swapping to a 3 blade make any difference?
|
| Sun Dec 28, 2014 2:29 pm |
|
|
|
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
|
Re: mb35 prop suggestion? Best in what way? The MB Big Blade is a damn good all around prop.
Their Hammer prop is even better in my opinion, if you can turn it 4700-4800 rpms. Otherwise, stick with the BB.
The GT 10p 3-blade may work decent, but I think you have to file on it a little to make it fit a MB shaft.
What prop you running now, and how fast are you spinning it?
|
| Sun Dec 28, 2014 2:46 pm |
|
|
|
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
|
Re: mb35 prop suggestion? Stock, run the bb
_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
| Sun Dec 28, 2014 8:14 pm |
|
|
|
Buzz Killington
MMT 1000 Club
Joined: Tue Jan 10, 2012 12:33 pm
Posts: 2455
|
Re: mb35 prop suggestion? This x2 ^
_________________
Support your troops - they support you
B. MacDonald
|
| Mon Dec 29, 2014 8:48 am |
|
|
|
Moby
MMT Member
Joined: Sat Jan 03, 2015 11:13 am
Posts: 5
|
Re: mb35 prop suggestion? I have a 29 hp kawi turning 3910 rpms out of the water and just ordered the 12x10 big blade should this help my boat get it a little better
|
| Sat Jan 03, 2015 9:38 pm |
|
|
|
GeeLeDouche
MMT Pro Member
Joined: Thu Jan 15, 2009 1:24 am
Posts: 455
|
Re: mb35 prop suggestion? You want the big blade.. I put one on my 31hp mudbuddy and it woke that sucker right up!
|
| Mon Jan 05, 2015 9:59 am |
|
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
|
Re: mb35 prop suggestion?
|
| Fri Jan 09, 2015 1:23 pm |
|
|
|
Moby
MMT Member
Joined: Sat Jan 03, 2015 11:13 am
Posts: 5
|
Re: mb35 prop suggestion? Also my model is a 2004 hyper it had the super long out drive on it and just replaced it with with a 27in out drive do you guys think this will hurt my speed? Also I have pods on the back and the boat is a alumacraft waterfowler 15 ft mod v
|
| Sat Jan 17, 2015 10:32 am |
|
|
|
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
|
Re: mb35 prop suggestion?
|
| Sat Jan 17, 2015 5:34 pm |
|
|
|
Moby
MMT Member
Joined: Sat Jan 03, 2015 11:13 am
Posts: 5
|
Re: mb35 prop suggestion? Why do the pods affect a shorter drive?
|
| Sun Jan 18, 2015 9:58 am |
|
|
|
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
|
Re: mb35 prop suggestion? The 27 is moving the prop 21" closer to the turbulence created by the pods.
|
| Sun Jan 18, 2015 4:24 pm |
|
|
|
WhoDat88
MMT 1000 Club
Joined: Thu May 23, 2013 4:24 pm
Posts: 2912
Location: Thibodaux, La
|
Re: mb35 prop suggestion?
_________________
1850 Predator Series Stick Steer Option
40HP Gatortail
|
| Sun Jan 18, 2015 4:30 pm |
|
|
|
Moby
MMT Member
Joined: Sat Jan 03, 2015 11:13 am
Posts: 5
|
Re: mb35 prop suggestion? So what do you guys think in performance decrease with the 27 in drive with the pods like a mile an hour or way worse than that? I like how much better it handles but the lose in speed I had with 2 guys gear and dog was crazy but also I had a crap threaded prop on that I had cut to fit the hex shaft got the big blade on now but haven't tried it yet because the river by my house froze
|
| Sun Jan 18, 2015 6:49 pm |
|
|
|
