| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 3 BLADE RPM??? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=12376 |
Page 1 of 1 |
| Author: | fowl habbit [ Tue Sep 14, 2010 7:03 pm ] |
| Post subject: | 3 BLADE RPM??? |
I just put the new 3 blade on my mud motor this afternoon and It gets me outta the hole fast and seems fast on plane. My concern is when I was running the Big 2 Blade tiger prop I was getiing like 4450 to 4500 now with 3 blade I went to like 3900 rpms it seems like its opening up but it also pushes against me really bad. Wondering if this is common or if I need to adjust somthing. I knew I would loose some Rpms but didnt think it would that many. Any help is greatly appreciated |
|
| Author: | b_coonass [ Tue Sep 14, 2010 7:06 pm ] |
| Post subject: | Re: 3 BLADE RPM??? |
| Author: | fowl habbit [ Tue Sep 14, 2010 7:08 pm ] |
| Post subject: | Re: 3 BLADE RPM??? |
To eliminate the Pushing of the motor can I move the motor on transom and do I move it towards me or away |
|
| Author: | rebbeer [ Thu Sep 16, 2010 2:26 pm ] |
| Post subject: | Re: 3 BLADE RPM??? |
You should move it away from you. If it's pushing that bad, it may not make that big of a diference. You'd just have to try it and see. |
|
| Author: | fowl habbit [ Fri Sep 17, 2010 8:33 am ] |
| Post subject: | Re: 3 BLADE RPM??? |
I moved it away didin tmake that big off differnce. I bent the skek a little that didrection it helped some Ill just have to fight it a little. |
|
| Author: | b_coonass [ Mon Sep 20, 2010 1:59 pm ] |
| Post subject: | Re: 3 BLADE RPM??? |
Try moving around the weight in you boat! |
|
| Author: | fowl habbit [ Tue Sep 21, 2010 5:41 pm ] |
| Post subject: | Re: 3 BLADE RPM??? |
Bent the skeg away from me That seemed to help. I also notice If I put more weight on the opposite side of me it doesnt push as bad.Either way the 3 blade throws me outta the hole lost a little top end but it carrys a load way better. Thanks again |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|