| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Gdsd and prodrive prop https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=32300 |
Page 1 of 1 |
| Author: | gatorkiller1967 [ Tue Sep 11, 2012 5:59 pm ] |
| Post subject: | Gdsd and prodrive prop |
I see both are threaded. Are they interchangeable? |
|
| Author: | bbb [ Tue Sep 11, 2012 7:20 pm ] |
| Post subject: | Re: Gdsd and prodrive prop |
Don't think so. |
|
| Author: | Gigafowl [ Tue Sep 11, 2012 7:34 pm ] |
| Post subject: | Re: Gdsd and prodrive prop |
Why YES they are... The PD 2 blade is very similar to the 2 blade Hopkins that GD used to use and the 3 blade GD is popular on the 25 and 27 PDs.... |
|
| Author: | duckdog34 [ Tue Sep 11, 2012 8:00 pm ] |
| Post subject: | Re: Gdsd and prodrive prop |
Don't mean to change the direction but what would be the gain on putting a 3 blade gd prop on a 27 pd |
|
| Author: | Gigafowl [ Wed Sep 12, 2012 4:59 am ] |
| Post subject: | Re: Gdsd and prodrive prop |
| Author: | woffman [ Wed Sep 12, 2012 5:30 am ] |
| Post subject: | Re: Gdsd and prodrive prop |
| Author: | Will [ Wed Sep 12, 2012 6:47 am ] |
| Post subject: | Re: Gdsd and prodrive prop |
May be the same threads but I bet that little bushing they put in the PD is the difference. It's made to clamp onto the upper shoulder of the shaft to take the load off of the threaded part of the shaft. (I don't know what the GD prop looks like, just stating what I do know about the PD prop) If the GD prop doesn't have this bushing you strip the threads or something. |
|
| Author: | deltaduckmaster [ Wed Sep 12, 2012 8:08 am ] |
| Post subject: | Re: Gdsd and prodrive prop |
I think gd supplies Pd with props!! |
|
| Author: | bbb [ Wed Sep 12, 2012 6:44 pm ] |
| Post subject: | Re: Gdsd and prodrive prop |
So why are ProDrive props so much easier to remove than GDs. Or is it more smoke and mirrors. |
|
| Author: | duckduckboom [ Wed Sep 12, 2012 7:17 pm ] |
| Post subject: | Re: Gdsd and prodrive prop |
PD owner's are smarter than GD owners. |
|
| Author: | CCC [ Wed Sep 12, 2012 7:19 pm ] |
| Post subject: | Re: Gdsd and prodrive prop |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|