I think it does but some people like it
Sent from my iPhone using
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| GDSD Prop https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=32883 |
Page 1 of 1 |
| Author: | WKUs final approach [ Wed Oct 03, 2012 6:01 am ] |
| Post subject: | GDSD Prop |
I have a 35 GDSD and was looking to get a new prop. Should i just order from GD or is there another company out there that makes a better prop. |
|
| Author: | Gameover [ Wed Oct 03, 2012 10:28 am ] |
| Post subject: | Re: GDSD Prop |
stick with the GD 3 blade, they run the best |
|
| Author: | bbb [ Fri Oct 05, 2012 2:59 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | Gigafowl [ Fri Oct 05, 2012 3:47 pm ] |
| Post subject: | Re: GDSD Prop |
3 Blade - GD prop is the best - 11 x 12 pitch 2 Blade - Hopkins 12 x 12 pitch ---- Is my 2nd favorite same as PD uses 2 Blade - MB Big Blade is a 10 pitch ---- guys with big or heavy rigs like the lower pitch |
|
| Author: | The Hairy Coot [ Thu Jan 30, 2014 10:05 pm ] |
| Post subject: | Re: GDSD Prop |
Anybody run the GDSD 3 blade on a MB? |
|
| Author: | AKA Freshwaterkilla [ Thu Jan 30, 2014 10:39 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | AKA Freshwaterkilla [ Thu Jan 30, 2014 10:40 pm ] |
| Post subject: | Re: GDSD Prop |
The 3 blade suks in mud and vegetation Sent from my iPhone using |
|
| Author: | RootSumn [ Thu Jan 30, 2014 11:22 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | Gigafowl [ Thu Jan 30, 2014 11:26 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | AKA Freshwaterkilla [ Thu Jan 30, 2014 11:39 pm ] |
| Post subject: | Re: GDSD Prop |
I think it does but some people like it Sent from my iPhone using |
|
| Author: | AKA Freshwaterkilla [ Thu Jan 30, 2014 11:39 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | Gigafowl [ Thu Jan 30, 2014 11:50 pm ] |
| Post subject: | Re: GDSD Prop |
Don't think so ! ! ! 
|
|
| Author: | WhoDat88 [ Fri Jan 31, 2014 9:18 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | AKA Freshwaterkilla [ Fri Jan 31, 2014 9:20 pm ] |
| Post subject: | Re: GDSD Prop |
325$ shipped Sent from my iPhone using |
|
| Author: | BAG Hunter [ Fri Jan 31, 2014 9:24 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | AKA Freshwaterkilla [ Fri Jan 31, 2014 9:26 pm ] |
| Post subject: | Re: GDSD Prop |
It's all about how many rpms u can turn the prop Sent from my iPhone using |
|
| Author: | WhoDat88 [ Fri Jan 31, 2014 9:30 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | AKA Freshwaterkilla [ Fri Jan 31, 2014 9:33 pm ] |
| Post subject: | Re: GDSD Prop |
I will sell u a brand new one for 250$ pm me Sent from my iPhone using |
|
| Author: | BlueShamu [ Fri Jan 31, 2014 10:15 pm ] |
| Post subject: | Re: GDSD Prop |
Offer him $200....he's had that thing for sale for about a year now. He'd take it. 
|
|
| Author: | AKA Freshwaterkilla [ Fri Jan 31, 2014 10:19 pm ] |
| Post subject: | Re: GDSD Prop |
ASSS:grin: Sent from my iPhone using |
|
| Author: | Gigafowl [ Sat Feb 01, 2014 1:45 pm ] |
| Post subject: | Re: GDSD Prop |
Not to mention that they were only $220 brand new from GD.... That 2 blade is still my favorite summer prop - faster solo and lightly loaded and a bit better over hard sand and in veggies too.... |
|
| Author: | JD [ Sat Feb 01, 2014 11:18 pm ] |
| Post subject: | Re: GDSD Prop |
I just tried the hopkins 12 x 12 tulip on my gdsd. I am running a 45mm carb, Manley ss valves, hoyts cam, marsh mellow can. I drooped 250 rpm but no speed. Stock motors will not turn these well with out a gear change. 3 blade is smoother a lot less vibration. New two blade you can feel the vibes through the tiller but not real bad. The two blade gets me going in the tough mud better. I will run 3 blade during fishing season and the hopkins tulip 2 blade during duck season. top end and load was about the same. JD |
|
| Author: | WhoDat88 [ Sat Feb 01, 2014 11:41 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | JD [ Sun Feb 02, 2014 12:13 am ] |
| Post subject: | Re: GDSD Prop |
| Author: | JD [ Sun Feb 02, 2014 12:14 am ] |
| Post subject: | Re: GDSD Prop |
| Author: | WhoDat88 [ Sun Feb 02, 2014 12:25 am ] |
| Post subject: | Re: GDSD Prop |
| Author: | GoDevilPro [ Thu Feb 06, 2014 9:55 pm ] |
| Post subject: | Re: GDSD Prop |
I have a gdsd to with a mb big blade a gd 3 blade and a home made prop that is 12.50 I have shaved heads and exhaust 18/50 boat but its pretty light the homemade prop runs 29 by myself very slow take off but once on top moves but motor only turns 3500rpms mb big blade best take off by far 27 by myself and pushes a load great 27 is at 4100rpms I have no governor can turn to 4500 but never have long enough to see the speed I could get the gd 3 blade can turn same as mb but speed is 25 by myself load is around 20 |
|
| Author: | LA Prop [ Fri Feb 07, 2014 5:33 pm ] |
| Post subject: | Re: GDSD Prop |
A stock gdsd prop would push my boat 30 mph with a stage 1 @ 4100 rpm something wrong with the prop lol |
|
| Author: | RootSumn [ Fri Feb 07, 2014 6:05 pm ] |
| Post subject: | Re: GDSD Prop |
31 @ 3950 rpms by myself with a new 3-blade on a heavy ass Grizzly hull. 2-blade is always about 4 MPH slower than the 3-blade for me, but will cut some chit up. |
|
| Author: | JD [ Fri Feb 07, 2014 6:09 pm ] |
| Post subject: | Re: GDSD Prop |
| Author: | WhoDat88 [ Fri Feb 07, 2014 8:47 pm ] |
| Post subject: | Re: GDSD Prop |
I might be able to work you out a very good deal on a two blade prop that has never been used yet. It is set up for the Three blade shaft and balanced. PM me if you are interested. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|