| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Siezed Taper Lock https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=33023 |
Page 1 of 1 |
| Author: | duck7878 [ Mon Oct 08, 2012 8:55 am ] |
| Post subject: | Siezed Taper Lock |
I removed my lower unit from my GTR35 to replace the shaft seals. I am trying to remove the taper lock bushing from the pulley and shaft, but can't get it to budge. I removed the two allen head bolts and put one of them in the third hole and tightened it down, but it didn't move. I am afraid to put too much pressure on it and strip the threads so I have been soaking it in liquid wrench and my next thought is to try heating up the pulley. Any other recommendations or ideas? |
|
| Author: | MaXXis85 [ Mon Oct 08, 2012 9:24 am ] |
| Post subject: | Re: Siezed Taper Lock |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|