| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Prodrive reverse ram prob https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=33383 |
Page 1 of 2 |
| Author: | jerimiahw [ Thu Oct 18, 2012 8:11 am ] |
| Post subject: | Prodrive reverse ram prob |
Anyone having trouble with reverse ram on prodrive I am going on my fourth one |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 8:13 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Um!! |
|
| Author: | jerimiahw [ Thu Oct 18, 2012 8:18 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
My tractor is 10 years old and I never changed a single ram boat got 100 hrs and its on number 4 I am fixing to go to local hydraulic shop and have one built maybe it will last longer than 3 months |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 8:28 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Maybe tchauvin can tell you what's the problem. |
|
| Author: | OwenDickeson [ Thu Oct 18, 2012 8:38 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
What did Pro-Drive have to say about it? |
|
| Author: | jerimiahw [ Thu Oct 18, 2012 8:53 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Just brought it to the shop it's still under warranty I didn't talk to pd yet |
|
| Author: | jerimiahw [ Thu Oct 18, 2012 8:55 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
I know what the prob is its a cheap ass ram I was wondering if anyone went as far as upgrading one or having another built |
|
| Author: | tchauvin [ Thu Oct 18, 2012 8:56 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | craig [ Thu Oct 18, 2012 8:59 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | bjg [ Thu Oct 18, 2012 9:00 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
I found on some that I worked on the ram would sometimes get in a bind and jam for a sec. Then the seal would start to leak after a while. |
|
| Author: | jerimiahw [ Thu Oct 18, 2012 9:00 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Oh shit u fuckers getting hard on all ready |
|
| Author: | bjg [ Thu Oct 18, 2012 9:03 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | take'emgator [ Thu Oct 18, 2012 9:07 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Don't get no oil on it, it might SLIP..lol Your right Chauvin they are cheap all the way around lol |
|
| Author: | tchauvin [ Thu Oct 18, 2012 9:15 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | tchauvin [ Thu Oct 18, 2012 9:17 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | Will [ Thu Oct 18, 2012 9:27 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | take'emgator [ Thu Oct 18, 2012 9:32 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | deltaduckmaster [ Thu Oct 18, 2012 9:34 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Fuck post it up. |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 9:35 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
You said it needed a new belt let look |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 9:38 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
I got 2 of the with 210 hrs on them I got one with 400+ I'll post pics of those to!! |
|
| Author: | petrel [ Thu Oct 18, 2012 9:46 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
I've had some issues with mine too. It hasn't leaked yet, it just starts intermittently hanging up when cycling into reverse. 165 hours and I have replaced two cylinders (under warranty), five switches (3 under warranty) and sent whole system back to PD once (under warranty). PD always stands behind their product and I applaud them for that. However, I am sort of sick of messing with it. Mine is starting to hang up cycling into reverse again! It must have something to do with binding, because I don't see many posts about the same problems with the trim. If anyone specs out a more reliable system, please post the specs. I'll replace the stuff at my own expense! |
|
| Author: | CJB [ Thu Oct 18, 2012 9:48 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | Will [ Thu Oct 18, 2012 9:55 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Sounds like you're not greasing the reverse disk enough, pump the shit out of it. |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 9:59 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | Will [ Thu Oct 18, 2012 10:08 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
That's a damn fine hornets nest you got there... LOL |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 10:14 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | Will [ Thu Oct 18, 2012 10:34 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | tchauvin [ Thu Oct 18, 2012 10:35 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | take'emgator [ Thu Oct 18, 2012 10:36 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Damn it WIll i ws thinking the same thing, there is one on my diesel forum site, them guys get crazy in there |
|
| Author: | take'emgator [ Thu Oct 18, 2012 10:37 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | tchauvin [ Thu Oct 18, 2012 10:38 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
PD is getting a new cylinder designed... its caused a lot by the cylinder end not being welded on strait, and these cylinders do not handle side loads well.. So, they are getting a cylinder the size of the trim built for the reverse... |
|
| Author: | tchauvin [ Thu Oct 18, 2012 10:40 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | deltaduckmaster [ Thu Oct 18, 2012 10:41 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | take'emgator [ Thu Oct 18, 2012 10:42 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Well say engine dip shit, and by the way you shim an engine not shit it. TARD Like i said you should probably stay away from other people's motors, just to be safe Got damn I'm bored at work, this is all i got to do chauvin sorry bud lol |
|
| Author: | tchauvin [ Thu Oct 18, 2012 10:42 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | take'emgator [ Thu Oct 18, 2012 10:43 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
I have the same year model. |
|
| Author: | deltaduckmaster [ Thu Oct 18, 2012 10:44 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Those belts are rated for 1000 hrs I'm pretty sure the belt is good just make sure it's not to tight the belt that is |
|
| Author: | tchauvin [ Thu Oct 18, 2012 10:46 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
| Author: | deltaduckmaster [ Thu Oct 18, 2012 10:46 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Same as me 09 is it the blue belt. On inside blue |
|
| Author: | tchauvin [ Thu Oct 18, 2012 11:00 am ] |
| Post subject: | Re: Prodrive reverse ram prob |
Ole boy just called me,,he went from turning 3600-3700 before heads, now turning right at 4000.... |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|