| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Prodrive reverse gear https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=34544 |
Page 1 of 1 |
| Author: | banded-mallard [ Wed Nov 21, 2012 4:36 pm ] |
| Post subject: | Prodrive reverse gear |
Ok guys, buddy of mine having problems. The prodrive auto reverse consists of 2 gears. A stationary gear, which is mounted to the lower unit and an actuation gear which is controlled by the hydraulic ram. His stationary gear had some broken teeth and is not allowing it to spin around in reverse. So for now, he keeps it going forward. He has ordered the gear from KP but didn't want them to install and miss out on the season. So we decided to tackle ourself. So I guess the first question is, how and what would be the best way to get to the gear? I assume either pulling the block or dropping the lower unit and tower to get to it. Either way, I've never done either. Needs to be a quick turnaround if possible. |
|
| Author: | craig [ Wed Nov 21, 2012 4:42 pm ] |
| Post subject: | Re: Prodrive reverse gear |
If I were your buddy, I'd call PD and chat with Peck about this. |
|
| Author: | cb5331 [ Wed Nov 21, 2012 5:03 pm ] |
| Post subject: | Re: Prodrive reverse gear |
X2, talk with peck. Usually he will send pretty detailed instructions via email. |
|
| Author: | OwenDickeson [ Wed Nov 21, 2012 6:48 pm ] |
| Post subject: | Re: Prodrive reverse gear |
Your going to have to lift the power head. No two ways about it. |
|
| Author: | banded-mallard [ Wed Nov 21, 2012 7:11 pm ] |
| Post subject: | Re: Prodrive reverse gear |
Damn. I was looking for the easy way. |
|
| Author: | naj [ Wed Nov 21, 2012 7:30 pm ] |
| Post subject: | Re: Prodrive reverse gear |
| Author: | cb5331 [ Wed Nov 21, 2012 7:33 pm ] |
| Post subject: | Re: Prodrive reverse gear |
| Author: | banded-mallard [ Wed Nov 21, 2012 7:55 pm ] |
| Post subject: | Re: Prodrive reverse gear |
I'm in Brusly but he is in Houma. Right down the road from H&H marine. Was gonna do the repair in his machine shop. |
|
| Author: | CJB [ Wed Nov 21, 2012 7:57 pm ] |
| Post subject: | Re: Prodrive reverse gear |
I'd let H&H handle it. Yea, you'll pay a little more, but Mike is usually pretty quick and it'll be done right. |
|
| Author: | naj [ Wed Nov 21, 2012 8:15 pm ] |
| Post subject: | Re: Prodrive reverse gear |
| Author: | naj [ Wed Nov 21, 2012 8:21 pm ] |
| Post subject: | Re: Prodrive reverse gear |
| Author: | duckduckboom [ Wed Nov 21, 2012 8:23 pm ] |
| Post subject: | Re: Prodrive reverse gear |
Hit me up next week. I live in thibodaux and work in Houma |
|
| Author: | banded-mallard [ Fri Nov 23, 2012 8:49 am ] |
| Post subject: | Re: Prodrive reverse gear |
I talked him out of it and he is gonna send it to H&H. I would have loved to see how it went together cuz wife "might" be getting me reverse setup for bday. But well have to wait and see on the "might". |
|
| Author: | pooldoo73 [ Mon Dec 03, 2012 9:18 pm ] |
| Post subject: | Re: Prodrive reverse gear |
Just so u know, Peck re-built my whole lower unit and replaced both reverse gears on my motor in 1 day last week. Dropped it off Monday and it was ready to go Tuesday around 9 am. |
|
| Author: | banded-mallard [ Tue Dec 04, 2012 9:49 am ] |
| Post subject: | Re: Prodrive reverse gear |
Yeah, he's back in the game now. It actually worked well this weekend because he needed to leave early and I stayed to continue the slaughter. So he had his own chit to get back to landing. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|