| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| What do you think?? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=35399 |
Page 1 of 1 |
| Author: | sftull [ Sun Dec 16, 2012 7:56 am ] |
| Post subject: | What do you think?? |
23 sd with cam, carb, crossover (heads to come in the spring) on a 1648 fisher. Its turning an 11x10 around 4200 rpm's , running just over 25mph. I'm running a 1:1.2 gear ratio. Keeping in mind that I run deep water 95% of the time, I'm thinking about the following two options. Go to a 1:1 ratio in hopes to gain some more speed. Will this spin the prop too fast and cause me to lose speed? Move to a big blade and lower my gear ratio back to a 1:1.5. Do you think I will gain any more speed or do you think I'll be back to where I am with my current setup? I know moving to a true mud hull will help pick up a few mph but I don't have the money. I would like to be around 27 ~ 30mph. |
|
| Author: | sftull [ Mon Dec 17, 2012 6:34 am ] |
| Post subject: | Re: What do you think?? |
48 views and no one has an opinion?? |
|
| Author: | TX Aggie '06 [ Mon Dec 17, 2012 10:21 am ] |
| Post subject: | Re: What do you think?? |
I don't hit 30 with my stock 35...25+ with a 23hp is getting it pretty good. I don't know much about them but i think clickster was able to get his 23gtr up around 27 with the mods he did. Not sure if he ever changed gears though. Sent from my MB865 using Tapatalk 2 |
|
| Author: | blmaloney [ Tue Jan 08, 2013 9:10 am ] |
| Post subject: | Re: What do you think?? |
Got a cousin that took his 27HP off his GD frame and mounted a 40hp on it and only gets 28 MPH So I would say your doing pretty good |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|