Yep, they make new ones everyday...
**Sent from my Obama Phone**
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Cutting skeg https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=36215 |
Page 1 of 1 |
| Author: | duckslayer182 [ Wed Jan 09, 2013 9:03 pm ] |
| Post subject: | Cutting skeg |
Anybody heard anything about cutting skeg |
|
| Author: | cb5331 [ Wed Jan 09, 2013 9:07 pm ] |
| Post subject: | Re: Cutting skeg |
Sure, cut it off. |
|
| Author: | CootSlayerRMFT [ Wed Jan 09, 2013 9:09 pm ] |
| Post subject: | Re: Cutting skeg |
Yep, they make new ones everyday... **Sent from my Obama Phone** |
|
| Author: | BayouStateHunter [ Wed Jan 09, 2013 9:16 pm ] |
| Post subject: | Re: Cutting skeg |
It grows back. |
|
| Author: | CCC [ Wed Jan 09, 2013 9:34 pm ] |
| Post subject: | Re: Cutting skeg |
| Author: | Goose Crumpler [ Wed Jan 09, 2013 11:23 pm ] |
| Post subject: | Re: Cutting skeg |
| Author: | Wildberry [ Thu Jan 10, 2013 4:15 am ] |
| Post subject: | Re: Cutting skeg |
Yea I thought about cutting my skeg and a bunch of extra wires around the starter. Should put me in the mid 30 mph range. Also cut the tiller handle off and get it welded to the top of the carb |
|
| Author: | tchauvin [ Thu Jan 10, 2013 5:54 am ] |
| Post subject: | Re: Cutting skeg |
| Author: | 23hplt [ Thu Jan 10, 2013 5:55 am ] |
| Post subject: | Re: Cutting skeg |
| Author: | banded-mallard [ Thu Jan 10, 2013 6:40 am ] |
| Post subject: | Re: Cutting skeg |
| Author: | tchauvin [ Thu Jan 10, 2013 7:29 am ] |
| Post subject: | Re: Cutting skeg |
| Author: | lastchance [ Thu Jan 10, 2013 7:32 am ] |
| Post subject: | Re: Cutting skeg |
viewtopic.php?t=24243 |
|
| Author: | OwenDickeson [ Thu Jan 10, 2013 7:46 am ] |
| Post subject: | Re: Cutting skeg |
I'm back to a stock skeg. Mine bit the dust and is in the dumpster. If I notice a difference going back to this one, I'll make another cut down one. |
|
| Author: | Wildberry [ Thu Jan 10, 2013 7:49 am ] |
| Post subject: | Re: Cutting skeg |
Is this just for pro drive's I thought it was a joke? My skeg is wearing out really quick and just never thought one would need to be cut |
|
| Author: | banded-mallard [ Thu Jan 10, 2013 7:55 am ] |
| Post subject: | Re: Cutting skeg |
| Author: | tchauvin [ Thu Jan 10, 2013 8:59 am ] |
| Post subject: | Re: Cutting skeg |
| Author: | Wildberry [ Thu Jan 10, 2013 9:13 am ] |
| Post subject: | Re: Cutting skeg |
Right on .... I be quiet now |
|
| Author: | POKER1 [ Mon Jan 14, 2013 10:22 pm ] |
| Post subject: | Re: Cutting skeg |
Cut a new one if you can. Just cutting the bar off a stock skeg does not give you the best angle. I believe in it. I can dig in a hard bottom much better and the better angle helps with the veggies. |
|
| Author: | THE TANK [ Tue Jan 15, 2013 8:21 am ] |
| Post subject: | Re: Cutting skeg |
I cut the Skeg on my pahnahs PD because I was tired of him getting stuck! He still gets stuck, but not as much......it works alot better if you cut it! |
|
| Author: | eljefe [ Tue Jan 15, 2013 8:25 am ] |
| Post subject: | Re: Cutting skeg |
take off the stock skeg and just cut a new one ............... |
|
| Author: | garrettpearce [ Tue Jan 15, 2013 8:40 am ] |
| Post subject: | Re: Cutting skeg |
Your prop hits a lot more shit |
|
| Author: | eljefe [ Tue Jan 15, 2013 8:41 am ] |
| Post subject: | Re: Cutting skeg |
my prop hit sh!t all the time anyway....
|
|
| Author: | T-Bubba [ Tue Jan 15, 2013 9:33 am ] |
| Post subject: | Re: Cutting skeg |
i know without the skeg it will run lillies that will stop it dead with it on |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|