| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| pd lower seal nut https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=36639 |
Page 1 of 1 |
| Author: | mbs [ Mon Jan 21, 2013 6:42 am ] |
| Post subject: | pd lower seal nut |
Are there orings in there or actual bonded seals? If its bonded seals, does anyone have a part number for them? I'll be pulling mine this weekend, and just looking for a heads up. Thanks. |
|
| Author: | banded-mallard [ Wed Jan 23, 2013 5:56 am ] |
| Post subject: | Re: pd lower seal nut |
They look similiar to a square o ring but they are shaft seals, rubber. Depending on what year your PD is, it may have 2 or 3. I had the old style with 2, it started leaking, brought it to PD and the swapped it out for the new style with 3 seals. All is good. They will just pop out by hand. |
|
| Author: | mbs [ Tue Jan 29, 2013 5:58 am ] |
| Post subject: | Re: pd lower seal nut |
Thanks. I'm guessing then they are r-rings, square cut o-rings pretty much. Do you know if they are buna, or viton? |
|
| Author: | ROGER504 [ Tue Jan 29, 2013 2:03 pm ] |
| Post subject: | Re: pd lower seal nut |
| Author: | mbs [ Tue Jan 29, 2013 7:08 pm ] |
| Post subject: | Re: pd lower seal nut |
Thanks man. Those are rhe 2 most common o-ring materials. Thanks again. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|