Its only missing about 1/4" off each blade. Free of charge
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 27hp PD prop https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=37562 |
Page 1 of 1 |
| Author: | Delta Goose [ Tue Feb 12, 2013 3:17 pm ] |
| Post subject: | 27hp PD prop |
Which prop do you use and how do you like it. |
|
| Author: | cb5331 [ Tue Feb 12, 2013 7:59 pm ] |
| Post subject: | Re: 27hp PD prop |
I ran the 2 blade for the 32 on my 27. It was a little slow out of the hole, but I could carry a load closer to my empty speeds. They offer a 3 blade for it now that they didn't offer back then, most guys I've seen with it are happy. Better hole shot and load carrying, not quite as good in the slop. What kind of conditions do you run most of the time? |
|
| Author: | renovator [ Tue Feb 12, 2013 8:25 pm ] |
| Post subject: | Re: 27hp PD prop |
I got a worn 36 prop u can have that may be just what you're looking for!! |
|
| Author: | cb5331 [ Tue Feb 12, 2013 8:32 pm ] |
| Post subject: | Re: 27hp PD prop |
| Author: | renovator [ Tue Feb 12, 2013 8:37 pm ] |
| Post subject: | Re: 27hp PD prop |
Its only missing about 1/4" off each blade. Free of charge
|
|
| Author: | cb5331 [ Tue Feb 12, 2013 8:42 pm ] |
| Post subject: | Re: 27hp PD prop |
 You can send it to me if you just want to give it away. It needs the cup to work properly. Just putting a worn out prop from a larger motor on a smaller motor isn't gonna get him what he needs. You lose all the "push". |
|
| Author: | renovator [ Tue Feb 12, 2013 9:00 pm ] |
| Post subject: | Re: 27hp PD prop |
Yep I was turning plenty rpm's but no speed
|
|
| Author: | Delta Goose [ Wed Feb 13, 2013 2:59 pm ] |
| Post subject: | Re: 27hp PD prop |
I run everything on the lake I hunt thick mud, shell beds, gravel and sand bars. I've ran GD and MB motors on the lake this is my first PD. What size is the 27 hp prop? and where can you get the 3 blade at I've looked at the hopkins web site just didn't what size to get. |
|
| Author: | TX Aggie '06 [ Wed Feb 13, 2013 3:04 pm ] |
| Post subject: | Re: 27hp PD prop |
From PD...? Sent from my MB865 using Tapatalk 2 |
|
| Author: | Delta Goose [ Wed Feb 13, 2013 3:07 pm ] |
| Post subject: | Re: 27hp PD prop |
Yea I've looked at the web site just order some parts from them just didn't know what everybody was having the best luck out of before I bought a new prop. |
|
| Author: | cb5331 [ Wed Feb 13, 2013 3:09 pm ] |
| Post subject: | Re: 27hp PD prop |
Call pd. |
|
| Author: | Delta Goose [ Wed Feb 13, 2013 3:12 pm ] |
| Post subject: | Re: 27hp PD prop |
Thanks I'll call PD |
|
| Author: | renovator [ Wed Feb 13, 2013 7:15 pm ] |
| Post subject: | Re: 27hp PD prop |
Pd is very helpful and will have you going in the right direction. Just tell them all of the conditions and your setup. |
|
| Author: | gatorkiller1967 [ Fri Feb 15, 2013 3:47 pm ] |
| Post subject: | Re: 27hp PD prop |
3 blade best on 27 Call Hopkins |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|