| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 14x4 1/2 flat go devil help https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=39475 |
Page 1 of 1 |
| Author: | poke_chop666 [ Sat Apr 06, 2013 7:55 pm ] |
| Post subject: | 14x4 1/2 flat go devil help |
I recently bought a 14 foot monark with a 4 1/2 bottom and put a 5hp go devil on it. It work but I want more. With 2 adults and gear I get 4 mph. Thinking about putting a 10hp and changing the prop. What's y'all eqperience with this and what would be y'all recommendations on props or anything. |
|
| Author: | instagator911 [ Sat Apr 06, 2013 8:03 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
8x4 prop. 14' x 52" or 14' x 48.5" ? |
|
| Author: | poke_chop666 [ Sat Apr 06, 2013 11:09 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
Its a 48" bottom. Just measured it. Guy I bought it from said it was 4 1/2 feet but that's the top. So u think a 8x4 with a 10 hp would be worth it? Right now its a 5 hp with a 7x5 and will go through weeds and stuff but lugs out if I dobt pick the balde up. |
|
| Author: | instagator911 [ Sat Apr 06, 2013 11:12 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
If your frame can handle more hp get bigger. but at 10hp go with the 8x4 it will give you more power less lugging. |
|
| Author: | poke_chop666 [ Sat Apr 06, 2013 11:57 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
I'm not worried about the frame. I'm a welder so I can always beef it up. Just have to find a motor and a prop. Just have to find the funds lol. If I could find a used motor id like to put a 13 horse on it if I could. |
|
| Author: | bobbyjober [ Sun Apr 07, 2013 9:00 am ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
16 hp electric start 299.99 free ship http://maxtools.com/ |
|
| Author: | poke_chop666 [ Sun Apr 07, 2013 5:57 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
Looks like a decent motor. Anyone ever had one of these? |
|
| Author: | poke_chop666 [ Sun Apr 07, 2013 6:14 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
Whatever the site is wont even allow me to order it. |
|
| Author: | Woodiebuster [ Thu Apr 11, 2013 4:28 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
23 hp and no less, but not on that frame. |
|
| Author: | poke_chop666 [ Thu Apr 11, 2013 4:41 pm ] |
| Post subject: | Re: 14x4 1/2 flat go devil help |
I just ordered a 16hp motor. Yesterday |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|