| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 3G PD Prop - Baggy Rework https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=44595 |
Page 1 of 1 |
| Author: | Kmoppert [ Fri Aug 23, 2013 6:57 pm ] |
| Post subject: | 3G PD Prop - Baggy Rework |
I received my 3 blade prop back from Baggy today and just got back from running it. Empty I gained 1.2mph on top end and then ran out of motor, not gear. Even with the 2:1 I can't turn it above 4250-4300, but it gains all the way there. I was slipping a lot with the original prop and It would blow out easily in shallow water. Also, there was zero speed gain from 4200-4600 rpm. Baggy added 1" of pitch and balanced it, that's all. No tip curl and no cup, just pitch. Now I run a consistent 27 and bump 28 empty and run 25 with my 100lb dog and girlfriend. Previously I would top out at 26 .4 empty and run 24-25 with dog and GF. It is still a tractor in the Lillie's and runs them even better than before. Let it be known that a stock engine can suck on my balls as I don't wish that on my worst enemy. Waiting for a few more hrs on the motor and thinking Calen's heads, gutted exhaust and EFI. This motor is still asleep and I hate it. |
|
| Author: | craig [ Fri Aug 23, 2013 7:09 pm ] |
| Post subject: | Re: 3G PD Prop - Baggy Rework |
Impressive. |
|
| Author: | CJB [ Fri Aug 23, 2013 7:34 pm ] |
| Post subject: | Re: 3G PD Prop - Baggy Rework |
Nothing wrong with that, especially on a stock motor. I'm thinking of bringing my old prop to him and see what I can get out of it with my stage 1 compared to my current stock prop. He does good work. |
|
| Author: | Kmoppert [ Fri Aug 23, 2013 7:37 pm ] |
| Post subject: | Re: 3G PD Prop - Baggy Rework |
Now it's a 15p. That's a lot of wheel. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|