MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
Missing bolt https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=45175 |
Page 1 of 1 |
Author: | d_white [ Sat Sep 07, 2013 5:48 am ] |
Post subject: | Missing bolt |
Went out gator hunting all night. Just pulled the boat out and noticed water pouring out of the belt housing. It appears that a bolt backed out of the bottom and this is where the water was coming from. 1). What size bolt/threads to I need to get the replace it? Should I use loctite? 2). What else needs to be done? Is there likely to be damage? I'm going to bed and don't want to think about it right now but want to address it wen I get up and hopefully be back I. The water again tonight. Thanks ImageUploadedByTapatalk1378554502.677382.jpg |
Author: | d_white [ Sat Sep 07, 2013 6:00 am ] |
Post subject: | Re: Missing bolt |
Sorry, forgot to mention. 35GtR. I hope I don't have to tear into this thing. It has less than 5 hours. |
Author: | T-Bubba [ Sat Sep 07, 2013 6:02 am ] |
Post subject: | Re: Missing bolt |
is that at the bottom of the belt housing? I am not familair with them, but would it just be a drain port or is something bolted to it on the inside |
Author: | Captchaz [ Sat Sep 07, 2013 6:07 am ] |
Post subject: | Re: Missing bolt |
Author: | autogateman [ Sat Sep 07, 2013 6:07 am ] |
Post subject: | Re: Missing bolt |
It's a 1/4-20 threaded hole |
Author: | mud slinger 69 [ Sat Sep 07, 2013 7:08 am ] |
Post subject: | Re: Missing bolt |
Should be ok trim the motor down all the way and get all the water out. |
Author: | SCmudder7071 [ Sat Sep 07, 2013 7:14 am ] |
Post subject: | Re: Missing bolt |
If you trim all the way down the drain hole will be elevated from the bottom of the belt housing. He would need to tilt the motor up so the drain will be facing down. |
Author: | JIMMY W [ Sat Sep 07, 2013 7:57 am ] |
Post subject: | Re: Missing bolt |
Author: | d_white [ Sat Sep 07, 2013 11:30 am ] |
Post subject: | Re: Missing bolt |
Author: | brycecheramie [ Sat Sep 07, 2013 11:59 am ] |
Post subject: | Re: Missing bolt |
Author: | bbb [ Sat Sep 07, 2013 12:00 pm ] |
Post subject: | Re: Missing bolt |
Home Depot of Tractor Supply have o-rings too. Use the shortest bolt possible, maybe 1/2"-3/4". We stayed out til 5am. Saw plenty of 8-9s but came home empty. Will be at it again tonight and they can't come back down so we'll be leaving with something. Nothing fell off my Go Devil last night!!!!! |
Author: | brycecheramie [ Sat Sep 07, 2013 12:03 pm ] |
Post subject: | Re: Missing bolt |
Author: | Captchaz [ Sat Sep 07, 2013 12:04 pm ] |
Post subject: | Re: Missing bolt |
Author: | brycecheramie [ Sat Sep 07, 2013 12:07 pm ] |
Post subject: | Re: Missing bolt |
Author: | MALLARDSX2 [ Sat Sep 07, 2013 12:37 pm ] |
Post subject: | Re: Missing bolt |
I hope this post wasnt for real |
Author: | diddyduck [ Sat Sep 07, 2013 12:41 pm ] |
Post subject: | Re: Missing bolt |
Author: | Choclab [ Sat Sep 07, 2013 1:25 pm ] |
Post subject: | Re: Missing bolt |
Should've bought a MB. |
Author: | dillakilla12 [ Sat Sep 07, 2013 3:22 pm ] |
Post subject: | Re: Missing bolt |
You can prob call gt or get someone to pull theirs out and take a measurement? ? True dat!! |
Author: | brycecheramie [ Sat Sep 07, 2013 3:31 pm ] |
Post subject: | Re: Missing bolt |
Author: | dillakilla12 [ Sat Sep 07, 2013 3:45 pm ] |
Post subject: | Re: Missing bolt |
Author: | d_white [ Sat Sep 07, 2013 9:57 pm ] |
Post subject: | Re: Missing bolt |
Sorry, thought I had replied earlier but my reception is crap out here. I got the answer close to the top. 1/4 20 thread. Out right now |
Author: | brycecheramie [ Sun Sep 08, 2013 3:50 am ] |
Post subject: | Re: Missing bolt |
Author: | mud slinger 69 [ Sun Sep 08, 2013 6:07 am ] |
Post subject: | Re: Missing bolt |
Author: | dillakilla12 [ Sun Sep 08, 2013 6:14 am ] |
Post subject: | Re: Missing bolt |
Author: | brycecheramie [ Sun Sep 08, 2013 7:27 am ] |
Post subject: | Re: Missing bolt |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |