| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 6.5 Honda Scavenger https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=45561 |
Page 1 of 1 |
| Author: | Killer Miller [ Tue Sep 17, 2013 8:37 pm ] |
| Post subject: | 6.5 Honda Scavenger |
Hey guys, I picked up a Scavenger with a 6.5 HP Honda motor for fairly cheap a few weeks ago. I'll be running it on a 12 foot layout boat that I got and have recently been fiberglassing. The motor fires right up. It's been sitting for a few years so I probably need to change the oil in it. Does anyone have one of these motors and know where the oil plug to drain it is? I'll run some seafoam through the first take or 2 of gas that I'll run through it. I've heard these don't push as well as other motors due to the belt driven system. Any tips or tricks to get a little more push/horsepower out of it? I don't really care how fast the boat goes, but I do want to be able to go through some muck! Thanks |
|
| Author: | FRANKtheTAU [ Tue Sep 17, 2013 9:27 pm ] |
| Post subject: | Re: 6.5 Honda Scavenger |
Oil drain plug is on the side of the block at the bottom. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|