| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Gear/sprocket size for Dixie 10hp https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=45776 |
Page 1 of 1 |
| Author: | cpt_wanus [ Tue Sep 24, 2013 6:34 am ] |
| Post subject: | Gear/sprocket size for Dixie 10hp |
Anyone know the size/ number of teeth/ part number for the drive of my motor? Was running motor this weekend and lower gear in lower unit crumbled in pieces. Can't get ahold of anyone at Dixie to help with the problem.....any help will be much appreciated. |
|
| Author: | Winn10 [ Tue Sep 24, 2013 4:19 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
| Author: | cpt_wanus [ Wed Sep 25, 2013 7:14 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
It's in about 8 pieces. The tapered bushing is what actually crumbled. I believe it's an 8mm but not 100%. Belt broke so I also need that part number. Took the lower unit apart to see why belt broke and bushing was in pieces on the bottom of the unit. |
|
| Author: | supercajun [ Wed Sep 25, 2013 7:15 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
whats the number on the top pulley? |
|
| Author: | cpt_wanus [ Wed Sep 25, 2013 7:22 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
Not sure but its a different size inside diameter than the shaft pulley. Top is 1in bottom is 3/4 i.d. |
|
| Author: | Winn10 [ Wed Sep 25, 2013 7:38 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
Is this like your top gear and belt? Sent from my SCH-I535 using Tapatalk 2 |
|
| Author: | cpt_wanus [ Wed Sep 25, 2013 7:50 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
Yes it does! Yours is obviously newer.....got a pic of the lower pulley? |
|
| Author: | Winn10 [ Wed Sep 25, 2013 7:56 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
i can get 1 tomorrow for ya, yeah mike replaced belt housing and put new pulleys/belt in march. This setup is alot better than what was on it before |
|
| Author: | Winn10 [ Wed Sep 25, 2013 8:33 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
Dammit you made me go take it apart:lol: the part# in case you cant see it is dodge p30-8m-30 (pulley) Belt# is 1120-8mpt-30 Hope this helps ya out bud Sent from my SCH-I535 using Tapatalk 2 |
|
| Author: | cpt_wanus [ Thu Sep 26, 2013 6:10 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
You the man!! Thx for the help |
|
| Author: | Winn10 [ Sat Sep 28, 2013 1:27 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
no problem bud |
|
| Author: | tbonzzz [ Thu Nov 14, 2013 11:24 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
I called mike he wants 300 bucks for the 2 pulleys and the belt anyone no where to get them aftermarket I want to upgrade I still got original pulleys and belt been eatin belts up |
|
| Author: | jedisme [ Thu Nov 14, 2013 11:46 pm ] |
| Post subject: | Re: Gear/sprocket size for Dixie 10hp |
EBay. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|