^^^ no handle?? That's ghetto!!!
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Prop Wrench https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=46032 |
Page 1 of 1 |
| Author: | crawfordw2 [ Thu Oct 03, 2013 2:54 pm ] |
| Post subject: | Prop Wrench |
I need to buy a prop wrench. Does anybody know where I can buy one? |
|
| Author: | dixieducker [ Thu Oct 03, 2013 2:55 pm ] |
| Post subject: | Re: Prop Wrench |
its easy to just make one |
|
| Author: | crawfordw2 [ Thu Oct 03, 2013 2:59 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | dixieducker [ Thu Oct 03, 2013 3:01 pm ] |
| Post subject: | Re: Prop Wrench |
1 1/4in flat bar about 4 feet long and drill a 3/4in hole 8in from the end. |
|
| Author: | dixieducker [ Thu Oct 03, 2013 3:04 pm ] |
| Post subject: | Re: Prop Wrench |
1 1/4in flat bar about 4 feet long and drill a 3/4in hole 8in from the end. |
|
| Author: | dixieducker [ Thu Oct 03, 2013 3:04 pm ] |
| Post subject: | Re: Prop Wrench |
1 1/4in flat bar about 4 feet long and drill a 3/4in hole 8in from the end. |
|
| Author: | crawfordw2 [ Thu Oct 03, 2013 3:19 pm ] |
| Post subject: | Re: Prop Wrench |
What kind of drill bit would I use? |
|
| Author: | bayouboy [ Thu Oct 03, 2013 3:49 pm ] |
| Post subject: | Re: Prop Wrench |
What motor? LT, PD. GD |
|
| Author: | med [ Thu Oct 03, 2013 3:54 pm ] |
| Post subject: | Re: Prop Wrench |
4ft 2x4 with a hole bout a ft from the end |
|
| Author: | crawfordw2 [ Thu Oct 03, 2013 3:56 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | Will [ Thu Oct 03, 2013 4:00 pm ] |
| Post subject: | Re: Prop Wrench |
3' crow bar |
|
| Author: | bayouboy [ Thu Oct 03, 2013 4:14 pm ] |
| Post subject: | Re: Prop Wrench |
Hell if your like me and take everything to extremes, you can get ridiculous and make one of these! there bad ass! You can remove a prop or tighten one up. lol |
|
| Author: | JLACOUR [ Thu Oct 03, 2013 4:21 pm ] |
| Post subject: | Re: Prop Wrench |
^^^ no handle?? That's ghetto!!!
|
|
| Author: | bayouboy [ Thu Oct 03, 2013 4:27 pm ] |
| Post subject: | Re: Prop Wrench |
| next one will be made white! lol |
|
| Author: | North LA Hunter [ Thu Oct 03, 2013 4:39 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | Bigrich [ Thu Oct 03, 2013 4:39 pm ] |
| Post subject: | Re: Prop Wrench |
Damn!!! I would say extreme!!! |
|
| Author: | duckslayer74 [ Thu Oct 03, 2013 4:49 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | bayouboy [ Thu Oct 03, 2013 4:54 pm ] |
| Post subject: | Re: Prop Wrench |
| Well lets see ya'lls ?? |
|
| Author: | North LA Hunter [ Thu Oct 03, 2013 4:56 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | Bigrich [ Thu Oct 03, 2013 5:01 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | bayouboy [ Thu Oct 03, 2013 5:12 pm ] |
| Post subject: | Re: Prop Wrench |
Well move along then boys!
|
|
| Author: | Will [ Thu Oct 03, 2013 5:13 pm ] |
| Post subject: | Re: Prop Wrench |
|
|
|
| Author: | JLACOUR [ Thu Oct 03, 2013 5:30 pm ] |
| Post subject: | Re: Prop Wrench |
Wanna trade?? |
|
| Author: | bayouboy [ Thu Oct 03, 2013 6:17 pm ] |
| Post subject: | Re: Prop Wrench |
Ha! What species of wood is that? Rotten pine?? |
|
| Author: | JLACOUR [ Thu Oct 03, 2013 6:32 pm ] |
| Post subject: | Re: Prop Wrench |
African hardwood, you baboon! |
|
| Author: | North LA Hunter [ Thu Oct 03, 2013 6:36 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | Bigrich [ Thu Oct 03, 2013 6:38 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | North LA Hunter [ Thu Oct 03, 2013 6:39 pm ] |
| Post subject: | Re: Prop Wrench |
| Author: | JLACOUR [ Thu Oct 03, 2013 6:58 pm ] |
| Post subject: | Re: Prop Wrench |
Lol |
|
| Author: | bayouboy [ Thu Oct 03, 2013 8:35 pm ] |
| Post subject: | Re: Prop Wrench |
|
|
|
| Author: | da go get'er [ Fri Oct 04, 2013 12:02 am ] |
| Post subject: | Re: Prop Wrench |
go devil sells them as well. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|