MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
GT Tiller Handle Nut https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=47903 |
Page 1 of 1 |
Author: | 270Handiman [ Mon Dec 02, 2013 7:04 pm ] |
Post subject: | GT Tiller Handle Nut |
A guy I hunt with is running an early GTR. He's having issues with the tiller handle nut working loose every trip. It's got to the point now that he keeps a wrench in the boat to tighten it up after every run to keep it from falling off while driving. Regardless of how much you tighten it, it starts to work loose when you lift the handle. Is there an easy fix for this or was this an issue that was redesigned somewhere down line or something? |
Author: | msm8281 [ Mon Dec 02, 2013 7:10 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Try red lock tite. |
Author: | dog walker [ Mon Dec 02, 2013 7:23 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Try a new lock nut. |
Author: | msm8281 [ Mon Dec 02, 2013 7:26 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Author: | brianb [ Mon Dec 02, 2013 7:26 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Mine is a 2012 and it gets loose so no new design as of then |
Author: | jc [ Mon Dec 02, 2013 7:27 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Put a new metal lock nut on it. |
Author: | North LA Hunter [ Mon Dec 02, 2013 7:39 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Author: | 270Handiman [ Mon Dec 02, 2013 7:42 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
What is that? I thought y'all were saying use a backup nut. |
Author: | 270Handiman [ Mon Dec 02, 2013 7:45 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
So we're basically just trying to find something that will work here i guess. Maybe use 2 stainless washers back to back to create a pivot point then the locknut? |
Author: | North LA Hunter [ Mon Dec 02, 2013 7:48 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
If its giving him that much trouble I would get a longer bolt If needed and put jam nuts on it! That would fix the problem for sure. Sent from my beeper. |
Author: | mudslut [ Mon Dec 02, 2013 7:56 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Just weld the nut to the bolt. Prob solved. Sent from my iPhone using Smoke Signals |
Author: | dog walker [ Mon Dec 02, 2013 8:03 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Once again, a new lock nut. |
Author: | AKA Freshwaterkilla [ Mon Dec 02, 2013 8:20 pm ] |
Post subject: | Re: GT Tiller Handle Nut |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |