| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 9" diameter prop worn to 7.5" https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=4853 |
Page 1 of 1 |
| Author: | duckbill [ Thu Sep 24, 2009 8:33 pm ] |
| Post subject: | 9" diameter prop worn to 7.5" |
I have a 24 hp beavertail longtail. I believe that the prop used to be 9" in diameter. I just went and measured it this evening and it measured 7.5" in diameter. How much will this effect the performance (speed) of my rig? |
|
| Author: | b_coonass [ Thu Sep 24, 2009 8:39 pm ] |
| Post subject: | Re: 9" diameter prop worn to 7.5" |
it will affect your speed about 2mph but it really affects your rig in mud b/c when the cup in the prop wears down the prop cant catch grip in the mud an your motor will un high rpm an it will so called spin out in the mud |
|
| Author: | duckbill [ Thu Sep 24, 2009 8:54 pm ] |
| Post subject: | Re: 9" diameter prop worn to 7.5" |
Thanks for the info. Any suggestions on where to buy a new prop? |
|
| Author: | shallow water master [ Thu Sep 24, 2009 9:33 pm ] |
| Post subject: | Re: 9" diameter prop worn to 7.5" |
| Author: | brav01 [ Mon Oct 05, 2009 5:58 pm ] |
| Post subject: | PROP |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|