Hey rich, you didn't accept that scholarship they offered you to the Derek Zoolander Center for Kids Who Can't Read good did you...
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| hammer props https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=50507 |
Page 1 of 2 |
| Author: | NannySlayer [ Mon Feb 17, 2014 8:00 pm ] |
| Post subject: | hammer props |
Are these just mythical creatures or do they exist? I have read about them on the mud buddy forum but not seen them for sale. Do you have to put a deposit down and wait forever or can you you just buy one somewhere? Are they as good as they are claimed to be? |
|
| Author: | lunacris [ Mon Feb 17, 2014 8:06 pm ] |
| Post subject: | Re: hammer props |
call boat dr |
|
| Author: | 270Handiman [ Mon Feb 17, 2014 8:13 pm ] |
| Post subject: | Re: hammer props |
You can buy them from most dealers. Boatdr has them in stock. I bought one to try at SETX in the mud and it did what they said....it digs hard in the mud. I lost some top end, but I gained grip in the soup. I'll put my big blade back on for this summer, but come duck season I'm going back with the hammer. |
|
| Author: | NannySlayer [ Mon Feb 17, 2014 9:06 pm ] |
| Post subject: | Re: hammer props |
Thanks, I will give him a shout... |
|
| Author: | LA Prop [ Thu Mar 13, 2014 1:01 pm ] |
| Post subject: | Re: hammer props |
U still want a hammer prop ?? I am a mb propeller dealer if u want I can get any of them. |
|
| Author: | Swamper01 [ Thu Mar 13, 2014 1:09 pm ] |
| Post subject: | Re: hammer props |
Do hammer props work on long tails? |
|
| Author: | pearl river outlaw [ Thu Mar 13, 2014 1:15 pm ] |
| Post subject: | Re: hammer props |
| Author: | LA Prop [ Thu Mar 13, 2014 4:50 pm ] |
| Post subject: | Re: hammer props |
No |
|
| Author: | msm8281 [ Thu Mar 13, 2014 4:59 pm ] |
| Post subject: | Re: hammer props |
| Author: | BoatDR [ Thu Mar 13, 2014 5:50 pm ] |
| Post subject: | Re: hammer props |
| Author: | NannySlayer [ Thu Mar 13, 2014 6:00 pm ] |
| Post subject: | Re: hammer props |
I have a 1754 gator Trax with a 35 mud buddy, BUT, pvt has my heads now. When they are done I am picking up all the goodies to build one of their mag 45. Right this sec the boat spins the big blade 4100 in deep water. |
|
| Author: | BoatDR [ Thu Mar 13, 2014 6:06 pm ] |
| Post subject: | Re: hammer props |
I dont recomend the hammer prop if you arent turning at least 4300 rpms, but you should be able to turn in the 4500 range once you add pistons, cam, and other internals. Have fun building the motor up. |
|
| Author: | LA Prop [ Thu Mar 13, 2014 7:22 pm ] |
| Post subject: | Re: hammer props |
| Author: | SCmudder7071 [ Thu Mar 13, 2014 7:46 pm ] |
| Post subject: | Re: hammer props |
Call Kevin. He usually has some laying around the shop. My PVT motor could turn a Hammer all day at 5k plus if I would let it. Kept it around 4600-4800 and could cruise at 29.8 in my F4 with 4 people and a cooler. |
|
| Author: | LA Prop [ Thu Mar 13, 2014 7:54 pm ] |
| Post subject: | Re: hammer props |
| Author: | NannySlayer [ Thu Mar 13, 2014 8:07 pm ] |
| Post subject: | Re: hammer props |
So 45-4700 rpm. Once the motor is built, what do I need to do to archive the higher rpm? Pretty sure my motor is non cdi but I will know for sure when the flywheel comes off. |
|
| Author: | 270Handiman [ Thu Mar 13, 2014 8:29 pm ] |
| Post subject: | Re: hammer props |
| Author: | LA Prop [ Thu Mar 13, 2014 8:37 pm ] |
| Post subject: | Re: hammer props |
| Author: | SCmudder7071 [ Thu Mar 13, 2014 8:38 pm ] |
| Post subject: | Re: hammer props |
That was my mud buddy LA. Non-CDI. |
|
| Author: | LA Prop [ Thu Mar 13, 2014 8:46 pm ] |
| Post subject: | Re: hammer props |
| Author: | BoatDR [ Thu Mar 13, 2014 8:48 pm ] |
| Post subject: | Re: hammer props |
| Author: | LA Prop [ Thu Mar 13, 2014 9:07 pm ] |
| Post subject: | Re: hammer props |
| Author: | schauv01 [ Fri Mar 14, 2014 6:25 am ] |
| Post subject: | Re: hammer props |
I've got one - never used if you're interested - PM me Sent from my iPad using Tapatalk HD |
|
| Author: | LA Prop [ Fri Mar 14, 2014 7:50 am ] |
| Post subject: | Re: hammer props |
Did u buy this prop new |
|
| Author: | lunacris [ Fri Mar 14, 2014 7:50 am ] |
| Post subject: | Re: hammer props |
| Author: | Gtr22 [ Fri Mar 14, 2014 8:14 am ] |
| Post subject: | Re: hammer props |
I tried one on my GT and it made the motor vary doggy and took about 5 mph off the top speed.And I have a PVT cam MWO custom heads single Mikuni and marsh mellow muffler. Them Guys at MuddyWaters swear by them Hammer props but it did not work for me |
|
| Author: | LA Prop [ Fri Mar 14, 2014 8:51 am ] |
| Post subject: | Re: hammer props |
| Author: | schauv01 [ Fri Mar 14, 2014 8:51 am ] |
| Post subject: | Re: hammer props |
| Author: | LA Prop [ Fri Mar 14, 2014 9:00 am ] |
| Post subject: | Re: hammer props |
| Author: | Gtr22 [ Fri Mar 14, 2014 10:23 am ] |
| Post subject: | Re: hammer props |
| Author: | 270Handiman [ Fri Mar 14, 2014 10:25 am ] |
| Post subject: | Re: hammer props |
| Author: | schauv01 [ Fri Mar 14, 2014 10:33 am ] |
| Post subject: | Re: hammer props |
| Author: | LA Prop [ Fri Mar 14, 2014 10:51 am ] |
| Post subject: | Re: hammer props |
| Author: | schauv01 [ Sat Mar 15, 2014 7:33 pm ] |
| Post subject: | Re: hammer props |
| Author: | THE TANK [ Sat Mar 15, 2014 8:03 pm ] |
| Post subject: | Re: hammer props |
I saw a Hammer prop today at the boat show on a sportv and it must be the casting because it looks like that. |
|
| Author: | cupped up [ Sat Mar 15, 2014 10:26 pm ] |
| Post subject: | Re: hammer props |
All you can change on a GT is the bottom gear. 48T or 45T. The kicker is, I believe you can only run a 48T gear in a 48T belt housing. It doesn't fit the old 45T housing...the top gear is the same, 38T is all you can get. And no. You cannot run a MB top gear on a GT. |
|
| Author: | Bigrich [ Sat Mar 15, 2014 10:51 pm ] |
| Post subject: | hammer props |
And you can get a bigger pulley for the lower but it won't fit in the belt housing opening is my understanding. |
|
| Author: | cupped up [ Sat Mar 15, 2014 10:57 pm ] |
| Post subject: | Re: hammer props |
Hey rich, you didn't accept that scholarship they offered you to the Derek Zoolander Center for Kids Who Can't Read good did you...
|
|
| Author: | Bigrich [ Sat Mar 15, 2014 11:42 pm ] |
| Post subject: | hammer props |
Hey cupped up I was talking about a 50 tooth pulley........................ Just saying |
|
| Author: | cupped up [ Sat Mar 15, 2014 11:53 pm ] |
| Post subject: | Re: hammer props |
My bad homie! I usually try to capitalize on drunk posts when I'm stuck at work on a weekend night...lol |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|