MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

3 Blade on a 27 Prodrive ???
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=51995
Page 1 of 1

Author:  tylerduckman [ Wed Apr 02, 2014 6:52 am ]
Post subject:  3 Blade on a 27 Prodrive ???

Wanting to get some feedback from someone that is running a 3 blade prop on a stock 27 prodrive. Speeds , load capacity etc....???

Author:  tylerduckman [ Fri Apr 04, 2014 9:44 am ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???

Holy Crap !!! I've never seen this group speechless!!

Author:  renovator [ Sun Apr 06, 2014 4:13 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???

I built a 1648 mostly .100 and sold it to a fried that runs that setup. He runs 27-28 empty and 24-25 with a 3 man hunt load in deep water.

Author:  Buzz Killington [ Wed Apr 09, 2014 2:47 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  brycecheramie [ Wed Apr 23, 2014 3:16 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  tylerduckman [ Wed Apr 23, 2014 3:39 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???

With the 2 blade I'm running 27 -28 empty in deep water and around 17 with a 3 man hunt load, if I'm lucky. That's what I want to know if the load carrying capacity is increased with the 3 blade. One of the guys that hunts with me weighs 340 and stands about 6'5". He damn sure slows me down.

Author:  brycecheramie [ Wed Apr 23, 2014 3:42 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  tylerduckman [ Wed Apr 23, 2014 3:50 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???

Sounds to me like you need to make your friend loose weight to hunt with you, or make him buy you a bigger boat and motor!

Well , he has a couple of leases and I have a boat. When his leases have birds we hunt there , when the lakes and rivers are good we use the boat. I actually considers getting bigger set up but this one I have is paid for!!! He'll I way 220 , when we have a third , a dog and gear I probably have 900lbs in that little skiff. It handles well , you just can't get in a hurry.

Author:  brycecheramie [ Wed Apr 23, 2014 3:55 pm ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  banded-mallard [ Thu Apr 24, 2014 6:09 am ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  brycecheramie [ Thu Apr 24, 2014 8:19 am ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  banded-mallard [ Thu Apr 24, 2014 9:15 am ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  brycecheramie [ Thu Apr 24, 2014 9:27 am ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???


Author:  banded-mallard [ Sun Apr 27, 2014 7:05 am ]
Post subject:  Re: 3 Blade on a 27 Prodrive ???

Haha. Yep, well the balls in his court.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/