this is y i like my cc. i dont feel shit.
it could be ur load, if u had a bunch of shit in the boat.
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Trying to fix my Tiller Torque https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=5504 |
Page 1 of 1 |
| Author: | richardb [ Tue Oct 20, 2009 11:32 am ] |
| Post subject: | Trying to fix my Tiller Torque |
I installed a new big blade and my tiller torque got really bad. I checked out the other posts were txshockwave put on a wedge ( viewtopic.php?f=41&t=3299&p=34658&hilit=skeg#p34658 ) but I didn’t have a real problem before. I think I might of bent my skeg when changing the prop but do not know which way to bend it back my prop is sucking over to the port side throwing my handle to the starboard site and I feel like I am bench pressing the whole time. Any suggestions would be great. Thank you |
|
| Author: | dog walker [ Tue Oct 20, 2009 12:59 pm ] |
| Post subject: | Re: Trying to fix my Tiller Torque |
If its pushing to the starboard side you bend the skeg to the port side.Try moving items in the boat around sometimes it is that easy,balance things out you can increase speed and ease tiller issues by moving stuff around. |
|
| Author: | richardb [ Tue Oct 20, 2009 1:59 pm ] |
| Post subject: | Re: Trying to fix my Tiller Torque |
thanks dog walker i will give it a try. |
|
| Author: | forever draggin [ Tue Oct 20, 2009 6:34 pm ] |
| Post subject: | Re: Trying to fix my Tiller Torque |
this is y i like my cc. i dont feel shit. it could be ur load, if u had a bunch of shit in the boat. |
|
| Author: | WestEndAngler [ Tue Oct 20, 2009 6:38 pm ] |
| Post subject: | Re: Trying to fix my Tiller Torque |
Bend the skeg left... like dog walker said. |
|
| Author: | richardb [ Tue Oct 27, 2009 5:24 pm ] |
| Post subject: | Re: Trying to fix my Tiller Torque |
Just wanted to say thanks I tweaked my skeg to the port side and it worked no torque at all. All I did was put a crescent wrench and just made a very small adjustment like ¼” to ½” and that’s all it needed. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|