| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 35gtr prop seal rebuild https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=57515 |
Page 1 of 1 |
| Author: | duckman40 [ Thu Oct 23, 2014 7:08 am ] |
| Post subject: | 35gtr prop seal rebuild |
I am replacing the seals by the prop on my 35gtr. I disassembled about a month ago and can't remember how they go. The order is seal-bearing-seal right? Which way do the seals face? And is that all that goes in there? Thanks for your help |
|
| Author: | LA Prop [ Thu Oct 23, 2014 8:02 am ] |
| Post subject: | Re: 35gtr prop seal rebuild |
im tearing one down this morning ill report back when im done but if im not mistaken they face the rear |
|
| Author: | BayouBuster [ Thu Oct 23, 2014 8:17 am ] |
| Post subject: | Re: 35gtr prop seal rebuild |
Mine had both seals stacked on top of each other then bearing. |
|
| Author: | BayouBuster [ Thu Oct 23, 2014 8:18 am ] |
| Post subject: | Re: 35gtr prop seal rebuild |
That's the only way they can go due to the matching of the cap now that I think about it. Make sure the spring side faces toward the prop. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|