| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| bigger prop of re gear? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=59254 |
Page 1 of 1 |
| Author: | chevy01 [ Sat Jan 10, 2015 6:44 pm ] |
| Post subject: | bigger prop of re gear? |
ok i got all my heads worked mikuni carb and exhaust i test drove it today at wot i am hitting the rev limiter trimmed down still turning 4,650 my question is should i buy the bigger prop or re gear it? |
|
| Author: | 270Handiman [ Sat Jan 10, 2015 8:17 pm ] |
| Post subject: | Re: bigger prop of re gear? |
MB 35? I'd try the Hammer first, it's nice if you have the rpm's to spin it. Borrow one and try it. |
|
| Author: | chevy01 [ Sun Jan 11, 2015 6:55 am ] |
| Post subject: | Re: bigger prop of re gear? |
yes sorry its was a stock mb 35 cdi motor with the 4,700 coil. i don't know any one that has one wish i did i know i am in need of a new prop soon any ways thats what i was trying to figure out if i should stick with the big blade and regear or buy the hammer |
|
| Author: | DmaxHunter [ Sun Jan 11, 2015 3:05 pm ] |
| Post subject: | Re: bigger prop of re gear? |
A bb is faster hammer will take off 150 rpm. you'll be all over limiter with that worn prop |
|
| Author: | chevy01 [ Sun Jan 11, 2015 6:26 pm ] |
| Post subject: | Re: bigger prop of re gear? |
i just had the mods done last week i couldnt spin over 4400 with my normal load now im bouncing the rev limiter same prop it has 96 hours on it |
|
| Author: | DmaxHunter [ Sun Jan 11, 2015 7:50 pm ] |
| Post subject: | Re: bigger prop of re gear? |
Measure the prop. I have a hammer and it brings mine down to the 4500 range. I had a bb reworked and it stays in the 4400 range but gets on step like no other |
|
| Author: | lunacris [ Sun Jan 11, 2015 8:28 pm ] |
| Post subject: | Re: bigger prop of re gear? |
try a hammer. great prop. I can turn 4600 with mine. |
|
| Author: | chevy01 [ Mon Jan 12, 2015 7:07 pm ] |
| Post subject: | Re: bigger prop of re gear? |
the prop measures 11.5 from tip to tip |
|
| Author: | msm8281 [ Mon Jan 12, 2015 7:07 pm ] |
| Post subject: | Re: bigger prop of re gear? |
Get a new prop |
|
| Author: | 270Handiman [ Mon Jan 12, 2015 7:22 pm ] |
| Post subject: | Re: bigger prop of re gear? |
| Author: | chevy01 [ Mon Jan 12, 2015 8:18 pm ] |
| Post subject: | Re: bigger prop of re gear? |
ok thanks should i just stick with the bb or get the hammer |
|
| Author: | Gigafowl [ Mon Jan 12, 2015 9:43 pm ] |
| Post subject: | Re: bigger prop of re gear? |
| Author: | 270Handiman [ Mon Jan 12, 2015 10:17 pm ] |
| Post subject: | Re: bigger prop of re gear? |
| Author: | 270Handiman [ Mon Jan 12, 2015 10:19 pm ] |
| Post subject: | Re: bigger prop of re gear? |
| Author: | 270Handiman [ Mon Jan 12, 2015 10:20 pm ] |
| Post subject: | Re: bigger prop of re gear? |
. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|