| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| ProDrive 2-Blade Gen 3 Prop https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=59868 |
Page 1 of 12 |
| Author: | CootSlayerRMFT [ Wed Feb 04, 2015 7:52 pm ] |
| Post subject: | ProDrive 2-Blade Gen 3 Prop |
Anybody know anything??? This prop is becoming the new unicorn. |
|
| Author: | WhoDat88 [ Wed Feb 04, 2015 7:59 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | Zeek569 [ Wed Feb 04, 2015 8:01 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Theirs a company about to send off the mold to one besides prodrive that I was realy satisfied with |
|
| Author: | schauv01 [ Sun Feb 08, 2015 10:27 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Zeek, what does that mean? |
|
| Author: | brstanle [ Sun Feb 08, 2015 10:51 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
It means that there's a different company building a prop that isn't related to this one at all. |
|
| Author: | schauv01 [ Mon Feb 09, 2015 9:45 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Pitch diameter difference? |
|
| Author: | Zeek569 [ Fri Feb 13, 2015 7:12 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
It's still being tested and geting some little fine tuning in but should be geting molded with in the next couple weeks and it's diffrent than prodrive but idk how diffrent cant realy tell you cause their both not finished |
|
| Author: | Zeek569 [ Fri Feb 13, 2015 7:14 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
It pulls a lot better than the gen 2's tho it's a whopper prop |
|
| Author: | msm8281 [ Fri Feb 13, 2015 7:15 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Dang just a few more weeks..lol Wasn't there another company with the two more week moto? |
|
| Author: | JLACOUR [ Fri Feb 13, 2015 7:24 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Prodrive got their shipment of the first batch in from mineseota this week. |
|
| Author: | doubleBanded [ Fri Feb 13, 2015 8:00 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
They really don't have any good props to run? |
|
| Author: | SCmudder7071 [ Fri Feb 13, 2015 8:04 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Mike should have one next week in time for our ride in SC. |
|
| Author: | MBfrogsnatcher19 [ Tue Feb 17, 2015 9:20 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | WhoDat88 [ Wed Feb 18, 2015 7:04 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I hope we can hear about this soon. |
|
| Author: | CootSlayerRMFT [ Thu Feb 19, 2015 8:43 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I just saw on facebook that people are getting their props in the mail from PD. Waiting for a review, especially on top end speed, when someone gets to run one... |
|
| Author: | OwenDickeson [ Thu Feb 19, 2015 8:55 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I believe they still have some fine tuning to work on the top end. I should have mine any day now. I'll post a before and after. |
|
| Author: | Terraboat [ Thu Feb 19, 2015 9:20 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | OwenDickeson [ Thu Feb 19, 2015 9:23 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I believe they are 265$. |
|
| Author: | Zeek569 [ Thu Feb 19, 2015 7:41 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
Modding your motor is the only way you gona gain speeds with this lower unit |
|
| Author: | MBfrogsnatcher19 [ Thu Feb 19, 2015 9:13 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I thought about calling of and getting them to send me some gears from a Gen 2. Idk if that would even work or what kind of gains you would see but I know they changed the ratio from Gen 2 to the Gen 3 |
|
| Author: | brycecheramie [ Fri Feb 20, 2015 8:57 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | msm8281 [ Fri Feb 20, 2015 9:15 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
It's the 2:1 reduction the prop is spinning slower that's why they're to get the prop situation fixed to make up the speed loss. Nothing to do with the clutch. |
|
| Author: | brycecheramie [ Fri Feb 20, 2015 9:32 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | msm8281 [ Fri Feb 20, 2015 9:44 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
No I'm sure he can't do that. Maybe I misunderstood your post. |
|
| Author: | brycecheramie [ Fri Feb 20, 2015 10:14 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | JLACOUR [ Fri Feb 20, 2015 10:18 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
You can't swap the gears. The LU knuckle is different. It's internally larger for the bigger ring gear. |
|
| Author: | brycecheramie [ Fri Feb 20, 2015 10:19 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | JLACOUR [ Fri Feb 20, 2015 10:19 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | brycecheramie [ Fri Feb 20, 2015 10:20 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | Terraboat [ Fri Feb 20, 2015 11:33 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | lil Cajun [ Fri Feb 20, 2015 11:44 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
So what's the scoop on the new 2 blade for the gen lll. Is it worth the coin or not a big difference anyone?? |
|
| Author: | MBfrogsnatcher19 [ Sun Feb 22, 2015 10:30 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I didn't know of that was possible either I just knew there was a different reduction and it would make since to me to possibly be in the gears just a thought I had. But ya anyone got the scope on the knew prop yet. Thinking bout getting one but don't wanna waste the money if there art any gains |
|
| Author: | brickgw [ Sun Feb 22, 2015 10:39 am ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | MBfrogsnatcher19 [ Sun Feb 22, 2015 12:11 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
My prop has 18 hrs on it and of the gains r their I'm throwing this 3 blade under the deck for a emergency |
|
| Author: | brickgw [ Sun Feb 22, 2015 12:21 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | 50fps [ Sun Feb 22, 2015 1:55 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | MBfrogsnatcher19 [ Sun Feb 22, 2015 2:03 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I get 24. With 6 gallons of gas and 2 Ppl at 220 a piece would love to see about 27 or 28. I don't care to fly but would like to keep up. Alot of the Ppl I ride with have gen 2s |
|
| Author: | brickgw [ Sun Feb 22, 2015 3:42 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Author: | pintail_89 [ Sun Feb 22, 2015 4:44 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
I'm still trying to figure out whey they changed the lower units from the Gen 2, I haven't really heard negative things about this Gen 3's but I feel like more people would rather the Gen 3 over the Gen 3. I wish yhey would leave the Gen 2 option out there if you wanted to special order one. Bc when I eventually have to get another I would want another Gen 2 Sent from my SAMSUNG-SM-N900A using Tapatalk |
|
| Author: | brickgw [ Sun Feb 22, 2015 4:54 pm ] |
| Post subject: | Re: ProDrive 2-Blade Gen 3 Prop |
| Page 1 of 12 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|