| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| help knowing if I have the correct prop! https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=60756 |
Page 1 of 1 |
| Author: | Stealfeathers [ Sat Mar 14, 2015 12:22 pm ] |
| Post subject: | help knowing if I have the correct prop! |
I need help knowing if I should put these props on. They are slightly different than the one I'm using. When I bought the motor he gave me three props. The one in the middle is the one I've been running. The one on left and right are slightly bigger. And have a different center. They will start to go on the shaft but if I wanted to get them all the way I'd have to hit with a mallet or something. How do I know if I can put them on or not? Thanks |
|
| Author: | Stealfeathers [ Sat Mar 14, 2015 12:46 pm ] |
| Post subject: | Re: help knowing if I have the correct prop! |
Going on a 23 HP mud buddy sd |
|
| Author: | doubleBanded [ Sat Mar 14, 2015 3:23 pm ] |
| Post subject: | Re: help knowing if I have the correct prop! |
Run them and find out witch runs better |
|
| Author: | Stealfeathers [ Sat Mar 14, 2015 4:50 pm ] |
| Post subject: | Re: help knowing if I have the correct prop! |
Double banded . is it normal that the prop would have to be forced on the shaft? The one on there now slides right on... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|