| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Gen III 3 blade on gen 4 prodrive https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=67088 |
Page 1 of 1 |
| Author: | bigj93 [ Sun Jun 05, 2016 10:22 am ] |
| Post subject: | Gen III 3 blade on gen 4 prodrive |
Has anyone tried a 3 blade from a gen III on the new gen 4 prodrives? I was thinking my stage 1 could sling a 3 blade off of a 27 hp. I'm running 31 mph on 18-48 uncle j custom turning 4500-4600 with a stock 2 blade. Was basically looking for a little more top end for the summer months. My motor has a bps q, mikuni 42hsr, and heads. |
|
| Author: | Motrolimp [ Mon Jun 06, 2016 4:04 am ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
I do not much want you to help me a little bit. |
|
| Author: | bigj93 [ Thu Jun 09, 2016 3:13 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
You reply was very confusing lol. What do you need help with? |
|
| Author: | teammarshmafia [ Thu Jun 09, 2016 4:32 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
Sounds to me you are about where you wanna be! In my opinion is think it may still be a little too much for a stage 1 put a cam in it and I think it'll turn it fine Sent from my SAMSUNG-SM-G890A using Tapatalk |
|
| Author: | brycecheramie [ Thu Jun 09, 2016 5:19 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
| Author: | Zeek569 [ Thu Jun 09, 2016 5:36 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
you won't have enough ass to turn it. I wanna say it's a 14 pitch prop |
|
| Author: | BlueShamu [ Thu Jun 09, 2016 6:53 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
Let's get this straight...PD does not have a Gen IV LU. The Gen III is available in two different gear ratios. |
|
| Author: | Zeek569 [ Thu Jun 09, 2016 7:24 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
do what lol |
|
| Author: | BlueShamu [ Thu Jun 09, 2016 9:29 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
I dunno, man....keep seeing these threads about Gen 4 and Gen IV LU's.....and I'm just OCD. |
|
| Author: | brickgw [ Thu Jun 09, 2016 9:48 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
Gen 3 and a half? |
|
| Author: | cb5331 [ Thu Jun 09, 2016 9:50 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
Its a gen 4 |
|
| Author: | cb5331 [ Thu Jun 09, 2016 9:51 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
|
|
|
| Author: | OwenDickeson [ Fri Jun 10, 2016 7:24 am ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
I got one you can try. 150$ to your door. |
|
| Author: | bigj93 [ Fri Jun 10, 2016 12:12 pm ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
Sent you a pm Owen |
|
| Author: | Woodiebuster [ Fri Jun 17, 2016 1:48 am ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
If you're not on the rev limiter I doubt you'll turn any more prop Sent from my iPhone using Tapatalk |
|
| Author: | Will [ Fri Jun 17, 2016 5:42 am ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
| Author: | bigj93 [ Fri Jun 17, 2016 8:20 am ] |
| Post subject: | Re: Gen III 3 blade on gen 4 prodrive |
Woodie I'm gunna be throwing a cam in it soon I'm just gunna see what it does after the cam. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|