| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Im looking for a Review of 1854 PD/ 35 GT https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=10969 |
Page 1 of 1 |
| Author: | Duck Diggler [ Sat Jul 17, 2010 5:42 pm ] |
| Post subject: | Im looking for a Review of 1854 PD/ 35 GT |
Im thinking of selling my 36 PD and buying a 35 GT. Need the instant reverse and since I run alot of salt water, the GT seems to draft a bit shallower, I also like the fact that the muffler is on the top and not sitting close to the water. Any reviews of a 1854 PD with 22inch sides and transom with a 35 GT? I'm kinda curious of what the GT will push my hull. |
|
| Author: | Brinkleydog [ Thu Jul 22, 2010 8:26 am ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Noticed no one has given you any help.... I tested a 1848PD round chine with a 35GTR and with 2 guys it ran 28.7 (about 400 lbs) with 4 guys it ran 18mph(1000lbs) The GTR will work ok, but be sure to get ready for a learning curv with the GTR. |
|
| Author: | dog walker [ Thu Jul 22, 2010 9:27 am ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
I ran 900 pounds of beef plus hunting gear in my 17x54GTB with a stock cdi motor last teal season and it averaged 24mph |
|
| Author: | UNCLE-J [ Thu Jul 22, 2010 11:50 am ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
| Author: | Shadow [ Thu Jul 22, 2010 12:37 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
| Author: | Duck Diggler [ Thu Jul 22, 2010 9:06 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
I never thought of that, thanks for the info. |
|
| Author: | UNCLE-J [ Thu Jul 22, 2010 9:08 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
| Author: | Shadow [ Thu Jul 22, 2010 9:10 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Do the trig. |
|
| Author: | UNCLE-J [ Thu Jul 22, 2010 9:38 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
You do it and email it to me. I will have my 11 yr old check it. LOL |
|
| Author: | dozrya [ Fri Jul 23, 2010 7:39 am ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
If 4* really mattered, you would not see GTRs on anything other than a 20* transom. They run on any alweld, g3, etc. Supposedly Aucoin does a 15* or 16* angle and they run GTRs on them. |
|
| Author: | Shadow [ Fri Jul 23, 2010 12:10 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Who goes by what the manufacturer recommends these days anyways? It'll work... run it! I was just saying that putting such a big "shim" in there to get that angle I dont think would be a smart thing... nothing more. |
|
| Author: | jordy [ Fri Jul 23, 2010 1:59 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
it will work fine on whatever degree you put it on....but however the GT is manufactured for 20* so if you put it any different it will perform different. i have witnessed first hand, a main reason i have just sold my steve scully hull and contacted uncle j for a new one with a 20* transom. it will help for performance in reverse and in the mud/veggies to have that 20* and im sure there are a few people on here that can confirm this. -jordy |
|
| Author: | deltaduckmaster [ Fri Jul 23, 2010 5:13 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
| Author: | Gigafowl [ Fri Jul 23, 2010 5:48 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Can we quote you on that ??? |
|
| Author: | Duck Diggler [ Mon Aug 02, 2010 7:39 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
well I spoke to the guys at GT. They have a few engines on PD boats. The engines run real good on the PD hull with no real issues to speak of. Most of the engines are shimmed a little to get the correct angle. PS- Gt does make a high transom model!!! |
|
| Author: | SP [ Sat Aug 14, 2010 6:02 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Have you pulled the trigger yet bud? We need to get out and do some scouting over the next few weeks. |
|
| Author: | Duck Diggler [ Sat Aug 14, 2010 7:04 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Newton, Im just going to keep the PD, but add the hydro T&T and possibly get some head work. I will shoot you an email in the next week or so to catch up. |
|
| Author: | DeathMetalDukk [ Thu Sep 23, 2010 9:07 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
My boat has a 16.5 degree transom, 21" tall, I was informed by Chops that this will keep the prop slightly higher for more top end speed, but not let it dig quite as deep in the mud. If it were a 20 degree angle, you would probably have a little more mud biting capability, but slightly slower top end speed, going by what I was told. |
|
| Author: | Duck Diggler [ Sun Oct 03, 2010 8:04 am ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
thanks for the info D, I dont run alot of mud here in florida, it is mostly heavy vegatation. I think the GT with work just fine on my PD hull. |
|
| Author: | slambin [ Sun Oct 03, 2010 9:35 pm ] |
| Post subject: | Re: Im looking for a Review of 1854 PD/ 35 GT |
Maxxis' runs a gtr on a brother breaux boat that is setup just like a prodrive boat. His boat does great down here inthe marsh. I did see one time where the reverse didn't work at well in the mud but that's it. I never seen him have to be pulled out, except when he flattened the cam. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|