nice
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 17x54 excel with HD6000 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=12818 |
Page 1 of 1 |
| Author: | yknot [ Mon Oct 04, 2010 12:27 pm ] |
| Post subject: | 17x54 excel with HD6000 |
I know this isent a mudbuddy forum Ive been looking for a long time realy wanted a gtr35 but couldent pass this up. I looked for a while only thing i dont like is it dosent have reverse. mudbuddy HD6000 EXCEL mudbuddy special addition 17x54 with 4' front deck with understorage to rear angled boxes in the back with hydroturf thruout all the rest of the boat open 24"sides all full flotation floor, sides and rear boxes filled .tripple tapered chine and slick bottom boat tested with coolor 6gallons of fuel battery and all saftey equipment shallow water speeds with 4 people all over 200 lbs each 27 to 28 dident test it in shallow emptey deep water solid 28.6mph did hit 29.2mph quiet a few times with same four people drop of to 3 people busted 30mph by myself 230lbs 34mph solid conditions were morning clear and cool no wind by the evening cloudy and windy I thought going into the wind would change speeds dident phase it. also the prop is fairley worn i have a new 12.25 big blade on the way cant wait to try it with new prop. this thing is a beast |
|
| Author: | cb5331 [ Mon Oct 04, 2010 12:36 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
Congrats on the new rig. Great speeds! Post some pics. |
|
| Author: | yknot [ Mon Oct 04, 2010 1:06 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
heres a few pics from my phone ill try to get some better ones |
|
| Author: | oncall [ Mon Oct 04, 2010 4:17 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
bada$$ rig, cograts! |
|
| Author: | Orangefoot [ Mon Oct 04, 2010 8:01 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
love those excels!! where are you from? |
|
| Author: | yknot [ Tue Oct 05, 2010 8:11 am ] |
| Post subject: | Re: 17x54 excel with HD6000 |
South Carolina |
|
| Author: | diceman [ Tue Oct 05, 2010 8:17 am ] |
| Post subject: | Re: 17x54 excel with HD6000 |
nice
|
|
| Author: | dtaylor [ Tue Oct 05, 2010 11:23 am ] |
| Post subject: | Re: 17x54 excel with HD6000 |
| Author: | yknot [ Tue Oct 05, 2010 12:09 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
upstate anderson area |
|
| Author: | dtaylor [ Tue Oct 05, 2010 1:15 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
| Author: | yknot [ Tue Oct 05, 2010 1:17 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
do you know where greenville is |
|
| Author: | dtaylor [ Tue Oct 05, 2010 1:20 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
| Author: | yknot [ Tue Oct 05, 2010 1:21 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
im south of greenville maybe 20 miles |
|
| Author: | SP [ Tue Oct 05, 2010 6:29 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
Those are great speeds! What RPM are you running? |
|
| Author: | yknot [ Wed Oct 06, 2010 12:15 pm ] |
| Post subject: | Re: 17x54 excel with HD6000 |
4850 to 4950 |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|